User's Manual

Appendix AAppendix A
65
64
5. Click OK to finish
3. Under Connect Using, the Ethernet card to which the Local Area Connection in
question is pointing is displayed. Underneath, the components that are bound to
the card are shown, with a check box next to them if they are currently active. Verify
that there is a check next to TCP/IP, and place one there if it is not checked.
Highlight the Internet Protocol (TCP/IP) option, and click Properties.
4. The Internet Protocol (TCP/IP) Properties window will open. There is only one
tab. Obtain an IP address automatically should be selected in the first section, and
Obtain DNS server address automatically should be selected in the second section.