User's Manual

Appendix AEnvironmental
55
54
Configuring TCP/IP For Windows NT 4.0
Please make sure you have your Windows NT Workstation 4.0 installation disks or CD-
ROM handy before beginning. Windows NT Workstation 4.0 may need to copy some
driver information during the configuration process. If your Ethernet card was supplied
with a driver diskette, be sure to have that available as well.
Note: As with all software, you should consult your users manual or the help files
for detailed information. Actiontec provides the information that follows as a
guideline only.
Network, Username, Computer Name Identification
To configure your NT Workstation v 4.0 click Start, go to Settings and then to Control
Panel. In Control Panel, double-click the Network icon. In the Network dialog box,
click the Identification tab and enter a Computer Name if needed and a Work Group.
Note: Do not change both Computer name and Workgroup at the same time.
Change one first and then restart. Then change the other and restart a second
time.
Appendix A
Power Input: External, 5V DC, 2.5 A
Certifications: FCC Class B, FCC Class C, CE Mark Commercial, UL, Wi-Fi
Operating Temperature: 0º C to 40º C (32ºF to 104ºF)
Storage Temperature: -20ºC to 70ºC (-4ºF to 158ºF)
Operating Humidity: 10% to 85% Non-Condensing
Storage Humidity: 5% to 90%, Non-Condensing
Environmental