User's Manual

11
Before you Connect the Cable/DSL Router
10
Before you Connect the Cable/DSL Router
4. Under the General tab select Obtain an IP address automatically, then selct
Obtain DNS server automatically. Click OK.
3. In the Local Area Connection Properties window select TCP/IP and then click
Properties. If there is not a listing for TCP/IP then refer to Appendix B for instal-
lation instructions now. If there are no Ethernet Adapters listed, then refer to the
Ethernet card manufacturer for installation instructions.
Configuring your Computer for Networking
Before configuring the Wireless Cable/DSL Router, a computer must be configured for
standard networking. If you are not running Windows XP, (shown below), then refer to
Appendix A for information on configuring other Windows or MacOS based operating
systems. It may be necessary to have the Windows CD or Ethernet card driver diskette
to complete the configuration.
1. Click Start, then Settings and finally
Network Connections.
2. On the right hand side of the screen, left click once on you the LAN or high speed
interenet connection that is listed. Then on the left hand side of the screen click
Change settings of this Connection.