User's Manual

Table Of Contents

Before you Connect the Cable/DSL Router

Your Host/Computer name and Workgroup name (Your ISP may use this information

to verify your identity on their network) (Cable only)

___________________________ ___________________________

Host Name __________________________

(Example: CY57640-A.cospgs1.co.home.com)

DNS Servers ______.______.______.______

(Example: 24.5.68.33)

Your Secondary DNS server address ______.______.______.______

(Click on the ... button to change the listing)

IP address __________________________

(Example: 24.253.117.45)

Subnet Mask (If assigned) ______.______.______.______

(Example: 255.255.255.0)

For a listing of the information required for the major broadband ISP’s, please

visit the following Website and select your specific ISP. Please make sure that

you have this information available when you configure the Actiontec

Wireless Cable/DSL Router.

HTTP://www.actiontec.com/support/homegateway/index.html

4. The Network Connection Details screen will supply you with neccessary informa-

tion. Write down this information for installation and future reference:

Default Gateway (If assigned) ______.______.______.______

(Example: 24.253.117.1)

Adapter Address _____-_____-_____-_____-_____-_____

(Example: 00-20-78-0F-B8-F0)

Your LOGIN name and PASSWORD (DSL only, provided by your ISP)

___________________________ ___________________________

Mail and Web Server Information

Some broadband providers use single words to direct the connection to their E-mail or

web servers (i.e. web, mail, pop3, www). If your ISP uses single words rather than a

whole internet address (pop.mail.actiontec.com), or IP address (24.55.224.34), then

you will need the full address information to configure your internet browser and/or E-

mail clients.

If this information was not provided during the installation and configuration of your

broadband connection, then you will need to contact your ISP and ask for it.