User's Manual
Table Of Contents
Appendix A Appendix A
67
66
5. Make sure the Use 802.3 option is unchecked.
6. Disregard any # in the IP Address field. This will be correct after your first con-
nection.
7. Click the Options button and set TCP/IP to Active. Uncheck the option Load
only when needed, and click OK when finished.
8. No entries should be made in any of the other fields (which are shown as blank in
the sample image above).
9. Click Close Box in the upper left hand corner of the TCP/IP window, and then
select Save to save your settings.
10. Go to the toolbar and select Restart from the Special menu to restart your com-
puter.
Configuring TCP/IP For Mac OS
As with all software, you should consult your users manual or the Macintosh help files
for detailed information. Actiontec provides the information that follows as a guideline
only.
Configuring Open Transport 2.5.2
To configure Open Transport:
1. From the top toolbar, click the Apple icon. Select TCP/IP from the Control Panels
menu.
2. Once the TCP/IP control panel is open, on the top toolbar click User Mode from
the Edit menu, and set the mode to Advanced. When done, click OK.
3. In the Connect via selection, select Ethernet.
4. In the Configure selection, select Using DHCP Server.