User's Manual

Appendix AAppendix A
57
56
TCP/IP Properties, IP Addressing, DHCP
With the TCP/IP Protocol highlighted, click Properties, and then click the IP Address
tab and click Obtain an IP Address from a DHCP Server. Click the Advanced tab to
verify that DHCP is enabled.
Services Configuration
Click the Services tab, and make sure the following default services are listed. These are
installed by default when you initially installed TCP/IP. Note that not all of the servic-
es listed below are required for the Actiontec Wireless Cable/DSL Router. For addition-
al information, refer to your NT Workstation documentation or Microsoft support
services.
Computer Browser
RPC Configuration
Server
Workstation
If you need to add a Service, click Add and do so.
Protocol Configuration
Click the PROTOCOLS tab, and then verify that the TCP/IP Protocol is listed. If it is
not, add it.