User's Manual

Configuring the Actiontec Wireless Cable/DSL RouterConfiguring the Actiontec Wireless Cable/DSL Router
31
30
4. Make sure that you have completed the 3 steps listed then click Next.
5. Select either DSL or Cable depending on your broadband service then click Next.
(If your have a T1 Line or Fixed Point Broadband, click Cable.)
6a. If you selected DSL enter your user name and password provided by your ISP.
Click Next.
3. Follow the on-screen instructions and then click Begin Basic Setup.
Basic Setup
Follow the step below to configure your Cable/DSL Router:
1. Open your Internet Web Browser and in the address bar type: http://192.168.0.1
and then press the <Enter> key.
Configuring the Actiontec Wireless Cable/DSL Router
2. When the web page is loaded, the following screen will appear. Click
Setup/Configuration.