User's Manual
FiOS Router User Manual
193
© 2011 Verizon. All Rights Reserved.
Additionally, QoS traffic shaping rules can be defined for a default device. These
rules will be used on a device that has no definitions of its own. This enables the
definition of QoS rules on the default WAN, for example, and their maintenance
even if the PPP or bridge device over the WAN is removed.
A.2a Device Traffic Shaping
This section describes the different Traffic Shaping screens and terms, and
presents the feature’s configuration logic.
Click 1. Quality of Service in the Advanced screen, then click Traffic Shaping.
The following screen appears.
Click 2. Add. The “Add Device Traffic Shaping” screen appears.
Select the device for which the traffic will be shaped. The drop-down list 3.
includes all the FiOS Router’s devices.
Click 4. Apply. A “Tx Traffic Shaping” section appears in the screen.
Select “Specify” or “Unlimited” from the “Tx Bandwidth” drop-down list. 5.
If “Specify is selected, enter the bandwidth amount (in Kbps) in the
appropriate text box.
Click 6. Apply.