User's Manual
Configuring Security Settings
6.10 Security Log
6
118
Fragmented packet, packet exceedss - a packet has been blocked because,
after defragmentation, the packet exceeded.
Fragmented packet, packet too bigs - a packet has been blocked because,
after defragmentation, the packet was too big.
FTP port request to 3rd party is forbidden (Possible bounce attack)s -
a packet has been blocked.
ICMP Flood Protections - a packet has been blocked, stopping an
ICMP flood.
ICMP protections - a broadcast ICMP message has been blocked.
ICMP redirect protections - an ICMP redirected message has been blocked.
ICMP replays - an ICMP (Internet Control Message Protocol) replay message
has been blocked.
IGMPs packet - an IGMP packet has been accepted.
Illegal packet optionss - the options field in the packet’s header is either
illegal or forbidden.
IP Version 6s - an IPv6 packet has been accepted.
IPV6 over IPV4s - an IPv6 over IPv4 packet has been accepted.
Malformed packet: Failed parsings - a packet has been blocked because it
is malformed.
Maximum security enabled services - a packet has been accepted because
it belongs to a permitted service in the maximum security level.
Multicasts IGMP connection - a multicast packet has been accepted.
NATs Error: connection pool is full. No connection created -a connection has
not been created because the connection pool is full.
NAT Error: Conflict Mapping already existss - a conflict occurred because
the NAT mapping already exists, so NAT failed.
NAT Error: No free NAT IPs - no free NAT IP, so NAT has failed.
NAT outs failed - NAT failed for this packet.