User Manual

39
6. In the “This connection uses the following items” list box, double-click Internet Protocol (TCP/IP).
7.
The “Internet Protocol (TCP/IP) Properties” window appears.
104 Actiontec 54 Mbps Wireless DSL Gateway User Manual
8. In the General tab, make sure the circle next to “Use the following
IP
Address” is selected. When active,
a black dot appears in the circle. If the circle already contains a black dot, leave it alone.
9. Enter the following address in the “IP Address” text box: 192.168.0.2Enter the periods in the address
by pressing the space bar on the keyboard.
10. Enter the following address in the “Subnet mask” text box: 255.255.255.0Enter the periods in the
address by pressing the space bar on the keyboard.
11. Click OK. The Internet Protocol (TCP/IP) Properties window disappears.
12 In the Local Area Connection Properties window, click Close. The Local Area Connection Properties
window disappears.
13. Click Close in the Local Area Connection Status window. The windowdisappears.
14. Close the Network and Dial-up Connections window by clicking on the “x” button at the upper right
corner of the window.
The computer restarts. It is now set up with a static
IP
address, allowing access to the Gateway’s Web
Configurator utility (as shown in chapters 3, 4, 5, and 6).