User Manual

26
Pressing this button saves any changes to the System Log screen and causes the Save and Restart screen to
appear.
Save Log As
Pressing this button allows the user to save a log as a file.
DSL Settings
To access DSL Settings, select DSL Settings from the “Utilities” screen. The Gateway’s VPI, VCI, Mode,
and QoS (Quality of Service) settings can be changed from this screen. Actiontec recommends not
changing these values without first consulting the ISP.
70 Actiontec 54 Mbps Wireless DSL Gateway User Manual
Restore Default Settings
To restore the Gateway to its factory default settings, select Restore Default Settings from the “Utilities”
screen. When the “Restore Default Settings” screen appears, click
Restore Default Settings
. Any changes
made to the Gateway’s settings will be lost and the factory default settings restored. During this process,
the Gateway’s Power light flashes and the Gateway is disabled.
N Warning: Do not unplug the Power cord from the Gateway during the Restore
Default Settings process. Doing so may result in permanent damage to the Gateway.
When the Power Light stops flashing and glows steadily green, the Gateway is fully operational.
Upgrade Firmware
Selecting Upgrade Firmware in the “Utilities” screen generates the “Upgrade Firmware” screen.
Actiontec periodically posts firmware upgrades to enhance the Gateway’s capabilities. Follow the
instructions on-screen to upgrade the Gateway’s firmware.