User Manual

23
5
Viewing the Gateway’s Status
After configuring the Gateway, settings can be viewed by selecting Status in the Web Configurator’s Main
Menu. In the menu on the left side, there are other Status options available: Routing Table, ARP Table,
WAN Status, LAN Status, and Active User List.No settings (other than connecting or disconnecting from
the Internet) can be changed from the Current Status screen.
General Status
After configuring the Gateway, settings can be viewed by selecting Status in the Main Menu. The “General
Status” screen appears, displaying many of the Gateway’s settings. No settings (other than connecting or
disconnecting from the Internet by clicking on Connect or Disconnect) can be changed from the General
Status screen.
Firmware Version
Displays the firmware version the Gateway is currently running.
MAC Address
Displays the
MAC
(Media Access Control) address of the Gateway.
6
Actiontec 54 Mbps Wireless DSL Gateway User Manual
6
WAN - Connection
Displays the state of the connection to the ISP service (Connected, Disconnected, or Connecting).
WAN - Mode
Displays the type of connection used to communicate with the
ISP
.
WAN - IP Address
Displays the IP address the ISP assigned to the Gateway.
WAN - Subnet Mask
Displays the subnet mask address the ISP assigned to the Gateway.
WAN - Gateway
Displays the Gateway address (for the
IP
address and subnet mask) the
ISP
assigned to the Gateway.
WAN - DNS #1 & #2