User Manual

4.2 OEM Installation Procedure of AC97 Soft Modem

Please follow the below steps one by one to install the driver software successfully.

1. Insert the card into MDC slot.

2. Power on your PC and allow windows load fully.

3. When Windows first detects the PCI Card or PCI device, click “Cancel”.

4. Insert the given Installation diskette and then double click the setup.exe file to run setup.

5. Click “OK” to start installation of modem driver.

6. The window of Add New Modem Wizard will pop up; click “Next”.

7. Click the option for to search for the best driver for your device.

8. Do not check any boxes for to search for locations, if any boxes are checked, uncheck it.

Then click “Next” to install driver.

9. Insert Disk Window will prompt for “AGRMDwxp.cat” file to copy. Click “Skip” button

and click “Finish”.

10. Click “Finish” again to complete the installation.

Note: The steps from 6 to 10 will be on in Window 98 / ME.

Important: Restart your computer to make the changes effective before you reinstall the driver.