User's Manual

Installing the

Action

tec 802.11a Networkin

gPCCard

Connecting the

Action

tec 802.11a Wireless PC

Card

1. Your computer can be on or off, it will not affect the installation process. Locate an avail-

able Type II or Type III PCMCIA slot on your laptop. If you are not sure where this may

be, please consult your laptop’s User Manual.

2. Insert the Actiontec 802.11b Wireless PCCard into the appropriate PCMCIA slot. Your

hardware is now installed.

Connecting the Actiontec 802.11a Wireless PCCard

Configuring Windows ME (Millennium Edition)

1. After you have installed the PC Card your computer will display the following dialog box.

Choose “Specify the location of the driver (Advanced)” and click Nextto continue.

Installing the Actiontec 802.11a Wireless PC Card

2. Please insert the Actiontec 802.11a Wireless PC Card Installation CD into your

CD-ROM drive. In the next screen, select the option Search for the best driv-

er for your device (Recommended) and select “Removable Media (Floppy,

CD-ROM..) then click the Next button.

This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB

003 B. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesirable operation.

Modifications not expressly authorized by Actiontec Electronics may invalidate

the user's right to operate this equipment.

WARNING!!

While this device is in operation, a separation distance of at least 20 centimeters

must be maintained between the radiating antenna and the body of all persons

exposed to the transmitter in order to meet the FCC RF exposure guidelines.