Dual PC Modem User Manual
Table of Contents 1 Introduction 1 Package Contents Minimum System Requirements Modem Features Technical Support 2 Setting up the Modem Connecting the First Computer Configruring the Modem Connecting a Second Computer 3 Basic Setup 1 1 2 4 5 5 13 15 17 Basic Setup 17 4 Custom Setup 21 Custom Setup DHCP Server Configuration Status 5 Utilities 21 22 24 25 Restore Default Settings Active User List Upgrade Firmware 25 26 26 6 Troubleshooting and Frequently Asked Questions 27 Troubleshooting
Actiontec Dual PC Modem User Manual D File and Printer Sharing Windows 98 and Me Windows 2000 Macintosh 57 57 64 65 E Glossary 67 Notices 71 Regulatory Compliance Notices Modifications Limited Warranty 71 71 73 ii
1 Introduction Thank you for purchasing the Actiontec Dual PC Modem. This easy to use Modem is the simplest way to connect up to two computers to a single phone line and share your internet connection. The Dual PC Modem is perfect for the home office or small business. If you want to take your computing to the next level, the Actiontec Dual PC Modem is one of the keys to your success.
Actiontec Dual PC Modem User Manual Modem Features This section contains a quick description of the Modem’s lights (LEDs), and ports and switches on its rear panel. Front Panel The Modem features 4 lights on its front panel: Power, Modem, Network 1, and Network 2. 2 1 RK WO NET DEM R WE PO MO Power Light The Power Light displays the Modem’s current status. If the Power Light glows steadily green, the Modem is receiving power and is fully operational.
Chapter 1 Introduction Rear Panel There are 5 ports (Power, 2, 1, Line, and Phone) and a Reset Switch on the rear panel. LINE 2 ROUTER UTER TO COMP PHONE 1 POWER RESET Power Adapter (from Power Port to Power Outlet) Ethernet Cable (from Port 2 to Second Computer) Ethernet Cable (from Port 1 to First Computer) Phone Cord (from Line Port to Phone Jack) Phone Cord (from Phone Port to Telephone) Reset Switch Depressing the reset switch for one or two seconds will reset the Modem.
Actiontec Dual PC Modem User Manual Line Port This port is used to connect a phone cord between the Modem and a phone jack. Phone Port This port is used to connect a phone cord between the Modem and a telephone. Technical Support Actiontec Electronics prides itself on making high-quality, durable, high-performance products. If you need assistance, the Actiontec Technical Support Department is available all day ever day to provide professional support. Actiontec Electronics, Inc. 760 N.
Setting Up the Modem 2 The instructions that follow parallel the steps contained in the Actiontec Installation Buddy™, which provides a visual guide to setting up the Modem. Actiontec recommends the user run the Installation Buddy first, before attempting any other procedures.
Actiontec Dual PC Modem User Manual 3. In the next window, click in the box next to “First computer”, then click Next. 4. Select No in the next window, then click Next. This Modem does not operate with AOL. 5. Read the onscreen instructions, then click Next.
Chapter 2 Setting Up the Modem 6. Read the onscreen instructions, then click Next. 7. Get the Modem from the Quick Start Kit, then click Next. 8. Get the Yellow Ethernet cable from the Quick Start Kit, then click Next.
Actiontec Dual PC Modem User Manual 9. Insert one end of the Yellow cable in the Yellow port (marked “1”) on the back of the Modem, then click Next. 10. Insert the other end of the Yellow cable into an Ethernet port on the back of the computer, then click Next. An Ethernet port looks similar to a phone port, but is slightly larger. 11. Get the black Power cord from the Quick Start Kit, then click Next.
Chapter 2 Setting Up the Modem 12. Insert the smaller end of the Power cord in the Black port on the back of the Modem, then click Next. 13. Plug the larger end of the Power cord into a power outlet, then click Next. 14. Make sure the Power and Network 1 lights glow steadily green, then click Next. If either of the lights are not on, check the Power cord and Yellow cable connections.
Actiontec Dual PC Modem User Manual 15. When the Installation Buddy detects the modem, click Next. 16. Get the gray Phone cord from the Quick Start Kit, then click Next. 17. Insert one end of the gray Phone cord into the Orange port (marked “Line”) on the back of the Modem, then click Next.
Chapter 2 Setting Up the Modem 18. Plug the other end of the gray Phone cord into the phone jack closest to the computer, then click Next. 19. If installing a phone next to the computer, click in the box next to “Yes”, then click Next. If not installing a phone next to the computer, click in the box next to “No, ” click Next, and go to step 22. 20. Find the Phone cord of the telephone to be installed next to the computer and unplug it from the phone jack in the wall or back of the computer. Click Next.
Actiontec Dual PC Modem User Manual 21. Insert the other end of the Phone cord into the Green port (marked “Phone”) on the back of the Modem, then click Next. 22. The Modem is connected to the computer. Click Next, the go to “Configuring the Modem,” on the next page.
Chapter 2 Setting Up the Modem Configuring the Modem After physically connecting the Modem to the computer, it must be configured to connect to the ISP (Internet Service Provider). 1. In the next window, enter the main telephone number used to connect to the ISP in the “1st number” text box, then click Next. The other options in this window can be entered in the “Dial Configuration” screen. See chapter 3, “Basic Setup,” for more information. 2.
Actiontec Dual PC Modem User Manual 3. When the Modem has successfully connected, click Next. 4. A “Congratulations” window appears. Click Next. 5. Click Finish. The Modem is connected to the first computer. To connect to the ISP, click the Connect icon (two arrows, one pointing up and one pointing down) in the system tray (next to the clock). When the “Status” page appears, click Connect (see “Status” on page 23 for more information). The Modem is connected to the ISP.
Chapter 2 Setting Up the Modem To change other Modem settings, see chapter 3, “Basic Setup,” chapter 4, “Custom Setup,” and chapter 5, “Utilities.” To connect a second computer to the Modem, go to “Connecting a Second Computer,” below. Connecting a Second Computer 1. Insert the Installation Buddy CD in the CD-ROM drive of the second computer to be connected to the Modem. The Installation Buddy will start automatically.
Actiontec Dual PC Modem User Manual 3. In the next window, click in the box next to “Additional computer,” then click Next. 4. Get the second Yellow Ethernet cable from the Quick Start Kit, then click Next. 5. Insert one end of the Yellow cable in the Yellow port (marked “2”) on the back of the Modem, then click Next.
Chapter 2 Setting Up the Modem 6. Insert the other end of the Yellow cable into an Ethernet port on the back of the computer, then click Next. An Ethernet port looks similar to a phone port, but is slightly larger. 7. Make sure the Network 2 Light on the front of the Modem glows steadily green, then click Next. If the Light does not illuminate, check the Yellow cable connections. 8. A “Congratulations” window appears. Click Next.
Actiontec Dual PC Modem User Manual 9. Click Finish. The Modem is connected to the second computer. To change other Modem settings, see chapter 3, “Basic Setup,” chapter 4, “Custom Setup,” and chapter 5, “Utilities.
3 Basic Setup This chapter is a guide through the basic setup of the Actiontec Dual PC Modem’s functions, including how to connect to the ISP. Basic Setup To perform a basic setup of the Modem: 1. Open a Web browser. In the address bar, enter http://192.168.0.1 then press Enter on the keyboard. 2. The “Main Menu” screen appears. Select Setup/Configuration. 3. Follow the instructions in the “Set Up/Configuration” screen, then click Begin Basic Setup.
Actiontec Dual PC Modem User Manual 4. In the next window, “Dial Configuration,” enter the user name and password used to connect to the ISP in the appropriate text boxes. Then, enter the main telephone number used to dial up to the ISP in the “#1 Number To Dial” text box (and, if applicable, a secondary number in the “#2 Number To Dial” text box). The additional options in this screen do not have to be configured at this time to connect the Modem to the ISP.
Chapter 3 Basic Setup Dial X To Disable Call Waiting Activate this option (by clicking in the check box) to disable call waiting, then enter the numbers that disable call waiting in the text box after “Dial.” If call waiting is left enabled, when someone calls on the same line on which the Modem is connected, the Modem will disconnect. After disabling call waiting, incoming caller will hear a busy signal. 5. When finished with the “Dial Configuration” screen, click Next.
Actiontec Dual PC Modem User Manual 22
4 Custom Setup This section contains information concerning the custom setup of the Modem Custom Setup To access the Custom Setup configuration screens, follow these instructions: 1. Open the Web browser. In the address bar enter: http://192.168.0.1 then press Enter on the keyboard. 2. The “Main Menu” screen appears. Select Setup/Configuration. 3. In the “Set Up/Configuration” screen, read the instructions, then select Custom Setup from the menu on the left side.
Actiontec Dual PC Modem User Manual DHCP Server Configuration Clicking Custom Setup in the “Setup/Configuration” screen generates the “DHCP Server Configuration” screen. Change the LAN IP address and DHCP server range here. LAN IP Address The value in the LAN IP Address text box is the IP address of the Modem as seen on the local network. The LAN IP address can be modified, but Actiontec recommends keeping the default factory setting (192.168.0.1).
Chapter 4 Custom Setup Setting the IP Address Range The beginning and ending IP addresses define the IP address range of the Modem. If the default values are left intact, the Modem supplies a unique IP address between 192.168.0.4 and 192.168.0.254 to each computer on the network. Note that the first three groups of numbers of the addresses are identical; this means they are on the same subnet. The IP address of the Modem must be on the same subnet as the IP address range it generates.
Actiontec Dual PC Modem User Manual Status After configuring the Modem, settings can be viewed by selecting Status in the Main Menu. The “Current Status” screen appears, displaying many of the Modem’s settings. No settings (other than connecting or disconnecting from the Internet) can be changed from the Current Status screen. After clicking the “Connect” icon in the system tray of the desktop, the Current Status screen appears. Click Connect to connect to the ISP.
5 Utilities To access the Dual PC Modem’s utilities, select Utilities from the “Main Menu” screen. The “Utilities” screen appears. From here, the Modem’s factory default settings can be restored, the active user list viewed, and the firmware upgraded. Restore Default Settings To restore the Modem to its factory default settings, select Restore Default Settings from the “Utilities” screen. When the “Restore Default Settings” screen appears, click Restore Default Settings.
Actiontec Dual PC Modem User Manual Active User List Selecting Active Users from the “Utilities” screen generates the “Active User List” screen. Here, the MAC (Media Access Control) address of the network card and IP address of the computer connected to the Modem are displayed. Upgrade Firmware Selecting Upgrade Firmware in the “Utilities” screen generates the “Upgrade Firmware” screen. Actiontec periodically posts firmware upgrades to enhance the Modem’s capabilities.
Troubleshooting and Frequently Asked Questions 6 This chapter includes a list of troubleshooting options and frequently asked questions concerning the Dual PC Modem. Troubleshooting Slow Speed/Dropped Connections If experiencing problems with slow speeds or dropped connections while using the Modem, the static speed setting on the Ethernet card in the computer may be the cause. To check or change this setting, select the operating system and follow the instructions: Windows 98, 98SE, and Me 1.
Actiontec Dual PC Modem User Manual Windows 2000 and XP 1. From the desktop, click the “My Network Places” icon (if using XP and the icon is not on the desktop, see “Placing the ‘My Network Places’ Icon on the Desktop,” below). 2. Right-click in the “My Network Places” window and select Properties. 3. In the “Network Connections” window, right-click on the connection for your Ethernet card (it may read “Local Area Connection”). 4. Click Properties. 5. Click Configure (under the Ethernet card). 6.
Chapter 6 Troubleshooting and FAQs Frequently Asked Questions I’ve run through the setup of the Modem and put in all my user information correctly, but the Modem won’t connect. What do I do? Different ISPs use different formats for their user names. There is an addendum on the back of the “Start Here” guide with hints about entering a user name. This information can also be found on our support site: www.actiontec.com/support. I have run out of Ethernet ports on my Modem.
Actiontec Dual PC Modem User Manual What is the valid IP range I can use for my home network? The default valid IP range for the Actiontec Dual PC Modem is 192.168.0.4 to 192.168.0.254. These values can be changed in the “DHCP Server Configuration” screen of the Web configurator Custom Setup section. See chapter 4, “Custom Setup,” for more information. How do I find out what IP address my computer is using? Windows 98, 98SE, and Me - Select Start, Run, then enter winipcfg. Click Enter.
Chapter 6 Troubleshooting and FAQs Everything appears to be setup properly with the Modem, but I can’t connect to the Internet. What should I do? If the Modem is not dialing out, it may need to be power cycled. To do this, unplug the power cord from the Modem. Leave it unplugged for about 30 seconds, then plug it back in. The Modem should now be able to dial out.
Actiontec Dual PC Modem User Manual I use an ISP that offers V.92 service. Will Modem On Hold (MOH) work with the Modem? No. The Modem does not support MOH.
A Setting Up Static IP Address To communicate with the Modem from a computer on the network (to use the Web Configuration Utility, for example), the user may have to switch the IP address settings from DHCP-enabled to static IP, so that the computer and the Modem are on the same subnet. To set up static IP on a computer, select the operating system and follow the instructions. The following procedures are based on the Modem’s fac☞ Note: tory default address.
Actiontec Dual PC Modem User Manual 3. Another menu appears. Select Control Panel. 4. When the “Control Panel” window appears, double-click Network.
Appendix A Setting Up Static IP Address 5. The “Network” window appears. In the "The following network components are installed" list box, locate and double-click the TCP/IP configuration matching the network card installed in the computer. 6. The “TCP/IP Properties” window appears. Select IP Address. 7. In the IP Address tab, make sure the the circle next to “Specify an IP Address” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone. 8.
Actiontec Dual PC Modem User Manual 9. Enter the following numbers in the “Subnet mask” text box: 255.255.255.0 Do not include the periods; they are automatically entered. 10. Select DNS Configuration. 11. Activate Enable DNS by clicking in the appropriate circle, then enter 192.168.0.1 in the “DNS Server Search Order” text box. Click Add. 12. Select Gateway. 13. In the “New gateway” text box, enter 192.168.0.1, then click Add.
Appendix A Setting Up Static IP Address 14. Click OK. The TCP/IP Properties window disappears. 15. In the Network window, click OK. The Network window disappears. 16. The “System Settings Change” window appears, asking whether the computer should be restarted. Click Yes. The computer restarts. It is now set up with a static IP address, allowing the user to access the Modem’s Advanced Setup utility. Windows Me 1. From the desktop, click on the Start button in the lower left corner. 2.
Actiontec Dual PC Modem User Manual 3. Another menu appears. Select Control Panel. 4. When the “Control Panel” window appears, double-click Network.
Appendix A Setting Up Static IP Address 5. The “Network” window appears. In the “The following network components are installed” list box, locate and double-click the TCP/IP configuration matching the network card installed in the computer 6. The “TCP/IP Properties” window appears. Click IP Address. 7. In the IP Address tab, make sure the the circle next to “Specify an IP Address” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone. 8.
Actiontec Dual PC Modem User Manual 9. Enter the following numbers in the “Subnet mask” text box: 255.255.255.0 Do not include the periods; they are automatically entered. 10. Select DNS Configuration. 11. Activate Enable DNS by clicking in the appropriate circle, then enter 192.168.0.1 in the “DNS Server Search Order” text box. Click Add. 12. Select Gateway. 13. In the “New gateway” text box, enter 192.168.0.1, then click Add.
Appendix A Setting Up Static IP Address 14. Click OK. The TCP/IP Properties window disappears. 15. If there is a check in the box next to “Detect connection to network media,” click on it to uncheck the box. 16. In the Network window, click OK. The Network window disappears. 17. The “System Settings Change” window appears, asking whether the computer should be restarted. Click Yes. The computer restarts.
Actiontec Dual PC Modem User Manual 3. Another menu appears. Select Control Panel. 4. When the “Control Panel” window appears, double-click Network and Dialup Connections.
Appendix A Setting Up Static IP Address 5. In the “Network and Dial-up Connections” window, double-click Local Area Connection. A number may be displayed after the Local Area Connection. If there is more than one Local Area Connection listed, locate the one that corresponds to the network card installed in the computer by finding the name of the network card in the Device Name column. 6. The “Local Area Connection Status” window appears. Select General, then click Properties. 7.
Actiontec Dual PC Modem User Manual 8. In the “Components checked are used by this connection” list box, doubleclick Internet Protocol (TCP/IP). 9. The “Internet Protocol (TCP/IP) Properties” window appears. 10. In the General tab, make sure the the circle next to “Obtain an IP Address automatically” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone. 11. Enter the following numbers in the “IP Address” text box: 192.168.0.
Appendix A Setting Up Static IP Address 12. Enter the following numbers in the “Subnet mask” text box: 255.255.255.0 Do not include the periods; they are automatically entered. 13. Enter the following numbers in the “Default gateway” text box: 192.168.0.1 Do not include the periods; they are automatically entered. 14. Activate the “Use the following DNS server addresses” circle by clicking in it. 15. Enter the following numbers in the “Preferred DNS server” text box: 192.168.0.
Actiontec Dual PC Modem User Manual Windows XP 1. From the desktop, click on the Start button in the lower left corner. 2. From the menu that appears, select Settings. 3. Another menu appears. Select Control Panel.
Appendix A Setting Up Static IP Address 4. When the “Control Panel” window appears, double-click Network Connections. 5. In the “Network Connections” window, double-click Local Area Connection. A number may be displayed after the Local Area Connection. If there is more than one Local Area Connection listed, locate the one that corresponds to the network card installed in your computer by finding the name of the network card in the Device Name column.
Actiontec Dual PC Modem User Manual 6. The “Local Area Connection Status” window appears. Select General, then click Properties. 7. The “Local Area Connection Properties” window appears. Select General. 8. In the “Components checked are used by this connection” list box, doubleclick Internet Protocol (TCP/IP).
Appendix A Setting Up Static IP Address 9. The “Internet Protocol (TCP/IP) Properties” window appears. 10. In the General tab, make sure the the circle next to “Use the following IP Address” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone. 11. Enter the following numbers in the “IP Address” text box: 198.162.0.4 Do not include the periods; they are automatically entered. 12.
Actiontec Dual PC Modem User Manual 17. In the Local Area Connection Properties window, click OK. The Local Area Connection Properties window disappears. 18. Click Close in the Local Area Connection Status window. The window disappears. 19. Close the Network and Dial-up Connections window by clicking on the “x” button at the upper right corner of the window. The computer is now set up with a static IP address, allowing the user to access the Modem’s Advanced Setup utility.
B Specifications General Model Number R7000M (Dual PC Modem) Dimensions Length: 5.375 in. Width: 4.35 in Height: 1.25 in Standards IEEE 802.3 (10BaseT) IEEE 802.3u (100BaseTX) LAN 10/100 RJ-45 switched ports (2) Speed LAN Ethernet - 10/100 Mbps Cabling Type Phone, Ethernet Modem 56 Kbps V.92 quick connect V.90 V.
Actiontec Dual PC Modem User Manual Environmental Power Input External, +9V +- 5% @ 1 A Certifications FCC Class B (part 15, 68) UL Operating Temperature 0º C to 40º C (32ºF to 104ºF) Storage Temperature -20ºC to 70ºC (-4ºF to 158ºF) Operating Humidity 10% to 85% non-condensing Storage Humidity 5% to 90% non-condensing 54
C Non-Windows System Setup The Modem supports both the Classic Macintosh operating systems (9.2.2 and below), as well as OS X. When installing any software, consult the user manual and ☞ Note: help files supplied with the software for detailed information. Actiontec provides the following information as a guideline only. Classic To configure the Router, Open Transport 2.5.2 or above must be loaded on the computer. 1. Click Apple, Control Panels, then TCP/IP.
Actiontec Dual PC Modem User Manual 2. When the “TCP/IP” window appears, select Edit from menu bar, then select User Mode. 3. When the “User Mode” window appears, select Advanced, then click OK. 4. In the “TCP/IP” window, select Ethernet from the “Connect via” drop-down list. 5. Select Using DHCP Server from the “Configure” drop-down list. 6. Ensure the “Use 802.3” option is not checked. 7. Disregard any addresses in the IP Address text boxes. They will be reacquired when the first connection is made. 8.
Appendix C Non-Windows System Setup OS X 1. Open the “System Preferences” application via the Dock or Apple Menu. The “Network” window appears. 2. Select Built-In Ethernet from the “Show” drop-down list. 3. Select TCP/IP and, from the “Configure” drop-down list, select Using DHCP. 4. Click Apply Now and close the “System Preferences” application. The TCP/IP settings are configured. Next, go to chapter 2, “Basic Setup.
Actiontec Dual PC Modem User Manual 58
File and Printer Sharing D The Modem supports file and printer sharing, allowing any computer on the network to share files and access a shared printer. To configure file and printer sharing, select the operating system and follow the instructions. Windows 98 and Me File Sharing 1. Click Start, Settings, then Control Panel. 2. In the “Control Panel” window, click Network. 3. The “Network” window appears.
Actiontec Dual PC Modem User Manual 4. In the “Select Network Component Type” window, select Service in the “Click the type of network component you want to install” list box, then click Add…. 5. The “Select Network Service” window appears. Select File and printer sharing for Microsoft Networks from the “Models” list box, then click OK. 6. In the “File and Print Sharing” window, ensure both of the listed options are checked. If not, click the boxes, then click OK.
Appendix D File and Printer Sharing 7. The “Network” window reappears. Select Identification. The “Identification” tab contains three text boxes: Computer Name - Enter the name of the computer (i.e., MyComputer, John, CPU654) in this text box. All computers on the network must have a unique name. ☞ Note: Actiontec recommends the “Computer Name” contain no spaces. For example, entering “jackscomputer” is correct; entering “big beige box” is incorrect.
Actiontec Dual PC Modem User Manual 8. Select Configuration. In the “Primary Network Logon” list box, ensure Client for Microsoft Networks is selected. If not, select it from the dropdown list, then click OK. 9. The “System Settings Change” window appears. Click Yes to restart the computer. ☞ Note: If the “System Settings Change” window does not appear, restart the computer manually after completing step 7. 10.
Appendix D File and Printer Sharing Locate the file or drive to share (navigate via “My Computer” or use Windows Explorer). 11. Right-click the file or drive to share. In the pop-up menu that appears, select Sharing. 12. Select Shared As from the “File Share Screen Properties” windows and enter a name in the “Share Name” text box. This name will show up on the other computers on the network as a shared device. 13. Select an “Access Type,” as explained below.
Actiontec Dual PC Modem User Manual Full - Allows other users on the network to read, modify, move, and delete any information in the selected file or drive. Sharing privileges can be restricted by entering a password in the “Full Access Password” text box.
Appendix D File and Printer Sharing Depends on Password - Allows both read-only and full access on the shared file or drive. The level of access depends on the passwords entered in the “Read-Only Password” and “Full Access Password” text boxes.
Actiontec Dual PC Modem User Manual Users with access to the read-only password have read-only privileges to the shared file or drive; users with access to the full-access password have full access to the shared file or drive. When finished, click Apply, then OK. Printer Sharing 1. To share a printer on the network, click Start, Settings, then Printers. 2. In the “Printers” window, right-click the printer to share and select Sharing from the pop-up menu. 3. Select “Shared As” in the window that appears.
Appendix D File and Printer Sharing Windows 2000 1. After configuring the computer (including installing and configuring the network adapter), Windows 2000 automatically enables file and print sharing. The only item to be checked is the computer and workgroup names. All computers on the network must have a unique computer name and the same workgroup name. To check or change the computer and workgroup names, right-click My Computer, then select Properties from the pop-up menu. 2.
Actiontec Dual PC Modem User Manual 5. The “Network Properties” window appears. Click OK, and restart the computer. Macintosh To set up file and printer sharing on a Macintosh computer: File Sharing 1. Select Apple, Control Panels, then File Sharing. 2. When the “File Sharing” window appears, select “Start/Stop.” In the “Network Identity” section, enter an Owner Name and Owner Password.
E Glossary Access Point A device that allows wireless clients to connect to one another. An access point can also act as a bridge between wireless clients and a “wired” network, such as an Ethernet network. Wireless clients can be moved anywhere within the coverage area of the access point and remain connected to the network.
Actiontec Dual PC Modem User Manual Ethernet Network A standard wired networking configuration using cables and hubs. Firewall A method preventing users outside the network from accessing and/or damaging files or computers on the network. Gateway A central device that manages the data traffic of your network, as well as data traffic to and from the Internet. IP (Internet Protocol) Address A series of four numbers separated by periods identifying a unique Internet computer host.
Appendix E Glossary PPPoE (Point-To-Point Protocol over Ethernet)/ PPPoA (Point-To-Point Protocol over ATM) Methods of secure data transmission. Router A central device that manages the data traffic of your network. Subnet Mask A set of four numbers configured like an IP address used to create IP address numbers used only within a particular network. SSID See “ESSID.” TCP/IP (Transmission Control Protocol/Internet Protocol) The standard protocol for data transmission over the Internet.
Actiontec Dual PC Modem User Manual 72
Notices Regulatory Compliance Notices Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Actiontec Dual PC Modem User Manual 2. This device must accept any interference received, including interference that may cause unwanted operation. To comply with FCC RF exposure compliance require☞ Note: ments, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Limited Warranty Hardware: Actiontec Electronics, Inc., warrants to the end user (“Customer”) that this hardware product will be free from defects in workmanship and materials, under normal use and service, for twelve (12) months from the date of purchase from Actiontec Electronics or its authorized reseller.
Actiontec Dual PC Modem User Manual THIS ACTIONTEC ELECTRONICS PRODUCT MAY INCLUDE OR BE BUNDLED WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. THIS ACTIONTEC ELECTRONICS WARRANTY DOES NOT APPLY TO SUCH THIRDPARTY SOFTWARE. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERNING THE USE OF SUCH SOFTWARE.
Limited Warranty NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.
Actiontec Dual PC Modem User Manual Governing Law: This Limited Warranty shall be governed by the laws of the State of California, U.S.A., excluding its conflicts of laws and principles, and excluding the United Nations Convention on Contracts for the International Sale of Goods.
