User's Manual

-7-
Remote Control Function Descriptions
*Function control is available on the unit and the remote control.
** Not used in this model
*** Function only available if optional TV Tuner is installed.
1. POWER Button*
Press this button to turn the VOH8512 on. Press the button again to turn the VOH8512 off.
2. SOURCE Button*
Each time the button is pressed, the audio / video source will change: AV1, AV2, AUX.
3. AUTO MEMORY Button (AUTO PROGRAM Button)***
When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of
sufficent levels are automatically stored.
4. SKIP/SEARCH Button***
This button selects betweeen SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are
programmed into memory the when CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will
stop on all active channels.
5. ERASE/WRITE Button***
While tuned to a channel, pressing this button will store or erase the channel from memory
. The stored channel numbers are
displayed in “GREEN” and the erased channel numbers are displayed in “RED”.
6. Channel Up ( ) Button***
Use this button to increase the channel number to the desired channel and to scroll upward in menu options.