OPERATION MANUAL ® 128-7935
Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
FEATURES Congratulations on your purchase of the Audiovox VOD128 DVD Player with Drop-Down Video / Monitor. The VOD128 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 8 7 6 5 43 2 1. EJECT ( ) Button This Button is used for ejecting discs from the disc Compartment. (Note: Disc can be ejected with the unit turned Off. Vehicle has to running or in ACC position). After the Disc is removed the unit will turn Off after 15-20 seconds. 1 17 9 10 2. STOP (n ) Button This button is used to stop playback. 11 12 3. Source Select Use to select one of the four sources: DVD, VIDEO 1, VIDEO 2, VIDEO 3. 13 4.
CONTROL FUNCTION DESCRIPTION (FRONT VIEW) 9. POWER ( ) Button Used to turn the system on/off. The VOD128 has an option that allows the user to select from two IR transmit and receive codes (M1 or M2). This feature can be used when using two VOD128s in the same installation or if the vehicle has an RSA (Rear Seat Audio) that uses an “A” channel headset. The VOD128 comes factory set to M1.
CONTROL FUNCTION DESCRIPTION (SIDE VIEW & BACK VIEW) Back View Side View 1 SMART PORT 1 2 3 1. Headphone Jack Allow the use of wired headphones with a 1/8" (3.5mm) plug for listening to the video program audio. 1. DVD Disc insertion Slot For loading and removing discs. Unit will turn On and load disc when disc is inserted. Note: Disc slot will be lit when unit is turned Off for easy loading at night. 2. Smart Port AUX Cable - Connect Auxiliary AV Input. IPOD Cable - Connect IPOD Input.
REMOTE CONTROL OPERATION MAIN FUNCTION DESCRIPTION 1 2 3 4 5 POWER MONITOR SYSTEM MENU SELECT EJECT 37 M1 M2 TV DVD DVD SOURCE 1 2 3 4 5 6 7 8 SOURCE AUTO MEMORY 6 36 35 34 SKIP/ SEARCH 7 ERASE/ WRITE 8 9 10 11 12 13 0 CHANNEL FMM ON/OFF SELECT DAY/ NIGHT PIX RETURN DISPLAY IRT ON/OFF MUTE 15 33 32 31 30 29 OK 14 Battery Installation 9 VOLUME SETUP MENU 28 16 Before attempting to operate your Remote Control, install the batteries as described below.
* Function control is available on the unit and the remote control. ** The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT2) is installed. *** The monitor select is available on the units which have two system mode control. 1. POWER Button* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT*** M1 Button – Change the remote control code to enable to control of the unit when set to the M1 mode.
. FMM ON / OFF Button* Turns the wireless FM Modulator on or off. Note : Function control is not available for Europe Country. 10. CHANNEL SELECT Button* Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, CH15 90.9MHz, CH16 91.1MHz) Note : Function control is not available for Europe Country. 11.
17. AUDIO Button Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes. Note: The languages for audio vary from disc to disc. 18. SUBTITLE Button Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language changes. Note: The type and number of languages for subtitle vary from disc to disc. ~ CC (close caption) selection in DTV mode. ) Button* 19.
26. A-B Button Allow user to repeat the playback from point A to point B. Press A-B buttonOn-Screen DisplayDVD player Repeat AMark the beginning of the section to repeat (Set point A) Once Repeat AB Mark the end of the section to repeat (Set point B) Twice Cancel the A-B repeat function 3 times AB Off ~ Program INFO in DTV mode. 27. ZOOM Button Press this button to enlarge the picture when playing a DVD disc.
31. DAY / NIGHT Mode Button This control toggles the unit between “Day” and “Night” LCD illumination modes. In the “Day” mode, the LCD backlit intensity is at maximum. In “Night” mode, the LCD backlit is dimmed to a preset level that is more suitable for low light operation. Note : Founction Control is not available on the existing unit. 32.
MENU ADJUSTMENT The System Menu Contains feature and option that let you customize your TV system to change the screen mode display, OSD language and source default. 1) Press the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen. 2) Use the cursor buttons p or q to select the desired item in the main page and press the OK button to select. 3) The sub menu will appear on screen.
OSD LANGUAGE This allows the user to select the language for the on-screen display. The user can either select English, Spanish, French or German for the OSD language. SYSTEM MENU SCREEN MODE OSD LANGUAGE SOURCE DEFAULT DVD OSD LANGUAGE ENGLISH SPANISH FRENCH GERMAN SOURCE DEFAULT DVD This allows the user to select from: DVD default on- When ever the unit is turned on it will return to DVD mode. DVD default off- When ever the unit is turned on it will return to the last source selected.
SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the onscreen display, limit playback for children. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown per diagram. Language Video Language Setup Language OSD Language : English Video Setup Video Subtitle : Off Rating Audio : English Rating Rating Setup Misc Misc Setup Misc or u 2.
LANGUAGE SETUP Language OSD Language Video Subtitle Language for On-Screen Display Rating Audio OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display. The user can either select English, French, Spanish, German or Italian for the OSD language. Misc SUBTITLE SETUP English French Spanish German Italian Language OSD Language Video Subtitle Rating Audio English French select "SUBTITLE" using p q button, then press u button to enter the Sudmenu.
RATING SETUP Rating This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. G Language Parental : 6.Adult PG PG – 13 Password Video R Rating NC – 17 Misc Adult The rating level can only be changed when the displayed lock is open. For first time use to change parental control, using cursor u button to enter parental mode, key in the default password (3308) and press ENTER.
Screen Saver ON -Screen saver will appear OFF -Screen saver will not appear Language Video Rating Note: The DVD player will enable the Screen Saver mode if the unit is inactive for approximately 2 minutes. Load Factory Screen Saver Off On Misc Playing DVDs 1. Press the DISPLAY button on the remote control to display the status banner. Display banner include title, chapter, angle, audio, subtitle, audio, subtitle, title selection & chapter selection. 2.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed. Press the display button to turn the display off.
Flat Mode: play the entire disc 1/12 Flat Mode function always default On. During the Flat Mode is On, all the data folders with MP3, JPEG & movies picture will be play by sequencing. If Flat Mode function default to off, it just can play the selected folder only, other folders are disable. Mp 001 Flat Mode Repeat : Off Mode Normal : 002 003 004 JPEG Preview 005 Repeat: play repetitively 1/12 Repeat function have 4 options Off, Single, Folder, All.
Edit Mode Program View Add to Program 1/12 Mp Edit Mode Program View 001 Add to Program 002 Notice: Edit Mode/Program view/Add to program function must be used associatively, and they can't be used at play status. No other than Edit Mode function is On, Program view function and Add to program function can be used. 003 004 JPEG Preview 005 Method: Make sure not play back the disc, Move cursor to Edit Mode function, press ENTER, switch it's On/Off .
TURNING THE UNIT ON OR OFF 1. Pushing in the screen release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button* on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3.
OVERHEAD DOME LIGHTS The Dome Lights integrated into the VOD128 are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle’s interior lighting. Refer to the Installation Guide for wire connections.
SOURCE FEATURE AV1 The video input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video devices. To access the A/V inputs, turn the VOD128 on and press the source button on the VOD128 or the Source button on the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power button or remote control.
USING THE WIRELESS GAME CONTROLLER The Game Controller transmits to the VOD128 with two infrared transmitters located on the front of the Game Controller. The Game Controller must be pointed toward the VOD128 for correct operation. Press the source button on the remote control or the unit until AUX/GAME* is displayed. GAME CONTROLLER FUNCTIONAL DESCRIPTION 1. Install two AAA batteries in the Game Controller. Observe the correct polarity. 2. Use the ON/OFF selector switch to turn on the Game Controller.
TROUBLESHOOTING SOLUTION PROBLEM IR remote inoperative ? Verify that the batteries in the remote are fresh. ? Verify that the remote sensor eye is not obstructed. ? If monitor is set to M1, press M1 button on remote; If monitor is set to M2, press M2 on remote. Disc won't play ? Insert a disc with the label side facing up. ? Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs and MP3s. ? Both the unit and the disc are coded by region.
SOLUTION PROBLEM The icon ( x ) appears on screen ? The feature or action cannot be completed at this time because: 1. The disc’s software restricts it. 2. The disc’s software doesn’t support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number that is out of range. Picture is distorted ? The disc might be damaged. Try another disc. ? It is normal for some distortion to appear during forward or reverse scan.
REPLACEMENT PARTS Remote Control SPECIFICATIONS 136-4427 LCD Backlighting Edge Light Tube Resolution 2400 x 480 Pixels 1, 152, 000 Operation Temperature 32 ~131º F (0 ~ 55º C) Storage Temperature -4 ~ 158º F (-20 ~ 70º C) Backlit life 30,000 Hours Video Display System NTSC / PAL Headphone Audio Output 0.03W @ 32 ohms Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimension LxWxH 14.0” x 12.0” x 2.0” 356mm x 305mm x 51mm Specifications subject to change without notice.
12 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part therof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
WWW © 2006 Audiovox Electronics Corp.
