User's Manual

SOURCE DEFAULT FLO
This allows the user to set the system default source to FLO.
Note:
• If selected default source is set to FLO every time the unit’s power is cycled with the source set to something other then FLO, the unit will power
up and automatically switch the source over to FLO.
• Unit will be set to Last Memory on as the default mode of operation.
• Selection of Source default can only be made from within the system menu.
SCREEN MODE SELECT
This allows the user to change the screen format (aspect ratio 4:3, 16:9).
To select the screen aspect ratio format, highlight SCREEN MODE and press the ENTER button to access the submenu. Then press the
Up or down cursor buttons (p or q) to select from 4:3 or 16:9. Press ENTER button to confirm the setting.
SOURCE DEFAULT FLO
ON
OFF
SYSTEM MENU
OSD LANGUAGE
SOURCE DEFAULT FLO
SCREEN MODE
PICTURE
FMM
SYSTEM MENU
OSD LANGUAGE
SOURCE DEFAULT FLO
SCREEN MODE
PICTURE
FMM
4:3
16:9
14
SCREEN MODE