VOH10FR 10.
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants.
FEATURES Congratulations Congratulations on your purchase of the AUDIOVOX VOH10FR DVD Player with Drop-Down Video / Monitor. The VOH10FR has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1. FLO TV Control This control is direct local key to function with FLO TV. The mode LED will change from white to purple when the FLO TV is connected. 1 2 3 2. Infrared Transmitter and Sensor Transmits audio to wireless headphones, allows the remote control to operate the VOH10FR and to control other accessories in the system. ON OFF AUTO 4 5 6 7 8 9 10 3. Dome Lights Provide additional interior illumination. 11 4.
7. ( + ) Button / CURSOR (u) Control a.) ( + ) Button • Press and hold the (P) button to adjust the control by + (increase). • Use these buttons for channel changing (up), navigating menus and selecting items in FLO TV mode. b.) CURSOR (u) Control This button is only active for USB mode. Selecting your favorite by cursor (u) and press “OK” button on your remote control or press ( ) button on unit. Information slide show will begin while playing your favorite file. 10.
ACCESSORIES WIRELESS HEADPHONES The VOH10FR includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your wireless headphones.
AUX The AUX input may be connected to an external video source, video game system, or other audio/video devices. To access the audio / video inputs, turn the unit on and press the S (source) button on the VOH10FR or the Source button on the remote control until "AUX" is displayed on the screen. IPOD Playback & Charging For iPOD playback & charging the unit must selected to AUX source and user can play the iPOD thru the AUX input and at the same time charge the iPOD thru the USB.
REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION 1 2 3 4 5 POWER MONITOR SELECT EJECT 36 M1 M2 FLO DVD DVD SOURCE 1 2 3 4 5 6 7 8 35 SOURCE FMM ON/OFF 6 34 FMM SELECT 7 IRT ON/OFF 8 9 10 11 12 13 0 DISPLAY RETURN 15 MUTE PIX SYSTEM MENU 33 32 31 30 29 OK 14 Battery Installation 9 VOLUME MODE SETUP MENU 28 16 Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down.
* Function control is available on the unit and the Remote Control. ** Function not available in this model. *** FLO TV function only available when optional FLO TV module is installed. Note: Refer to Appendix A FLO TV for FLO TV operating instructions.. 1. POWER Button* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT Button M1 Button – Sets the remote control code to allow control of the unit set to M1 mode.
8. IRT ON/OFF Button Turns the Infrared Transmitter ON or OFF for IR Wireless Headphones. 9. DISPLAY Button Press to display the current multimedia file information while the multimedia file is playing. 10. RETURN Button Press for return to previous page/ previous menu. 11. SYSTEM MENU Button Allow the user to access the system menu. Press cursor (pq) buttons to select desired PICTURE, FMM , OSD LANGUAGE, SOURCE DEFAULT FLO and SCREEN MODE during power up. 12.
15. MENU / SETTINGS Button a.) MENU Button Pressing the MENU button to display the HOME Page Menu. Note: Pressing the FLO TV button will access the FLO TV mode and disable the USB functions. b.) SETTINGS Button ( ) *** When in FLO TV mode the Settings button allows user to toggle the FLO TV settings menu on/off. 16. REPEAT Button Allows the user to repeat a selected repeat one / repeat all. 17. AUDIO Button Press to display and select Audio changing audio to L/R/ Stereo. 18.
22. PAUSE Button (II) Press to pause playback. Pressing the PAUSE button again or pressing the PLAY Button will resume normal playback. 23. PLAY Button* Press to activate the play mode while a multimedia file is loaded in the multimedia file compartment. 24. SCAN FORWARD Button (8) Press to search in a forward direction. Press repeatedly to change the search Speed from x2, x3, x4 times the normal speed. 25. NEXT Button (:) Press to skip to the next file or next page. 26.
28. MODE / SETUP Button a.) MODE Button When in FLO TV mode pressing the MODE button toggles between FLO TV and an auxiliary A/V source attached to the FLO TV module. (NOTE: your system may not have an auxiliary source). b.) SETUP Button When in DVD mode pressing the SETUP button will display the SETTINGS which allows the user to change the options such as Language, Slideshow duration, Slideshow mode, Music repeat mode, Movie repeat mode, Autorun & Default.
34. NUMBER Buttons** When DVD mode these buttons allow the user to enter numbers 0 to 9 for selection of selection of CD tracks, DVD chapters and password. When FLO TV mode these buttons allow the user to select favorite channels and for PIN entry for parental controls. *** 35. DVD Source Button** This button is only active when remote control is in DVD mode. Each time the button is pressed one of the sources (DVD or USB) will be selected. If the USB is not plugged in, the unit it will remain on DVD Source.
MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the PICTURE, FMM, OSD LANGUAGE, SOURCE DEFAULT FLO and SCREEN MODE. 1) 2) 3) 4) 5) Press the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen. Use the cursor buttons p or q to select the desired item in the main page and press the ENTER button to select. The sub menu will appear on screen.
FMM SELECT FMM ON/OFF options - Turns the FM Modulator on or off. FMM SELECT option - Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, Ch15 90.9MHz, CH16 91.
SOURCE DEFAULT FLO This allows the user to set the system default source to FLO. Note: • If selected default source is set to FLO every time the unit’s power is cycled with the source set to something other then FLO, the unit will power up and automatically switch the source over to FLO. • Unit will be set to Last Memory on as the default mode of operation. • Selection of Source default can only be made from within the system menu.
SETTINGS AND ADJUSTMENTS SETTINGS HOME 1. To set the desired option, move the highlight into the setup area using the cursor button u. 2. After entering the setup area, highlight the desired option using the cursor button q or u. 3. Press u to open the sub menu that contains the different options available. Press q or u to highlight the desired option, and press ENTER to confirm the selection. 4. Repeat steps 3~4 to set the options that reside on the same Home Page. 5.
SLIDESHOW MODE SETUP SETTINGS V2010-05-14 C:/ Select “SLIDESHOW MODE” using qbutton. The user can either select Random, Fading, Off, Bottom_To_Top, Top_To_Bottom, Left_To_Right, Right_To_Left, Door_Close, Door_Open, Hori_Cross and Verti_Cross, then select the Slideshow Mode you desire using ubutton, then press “ENTER”/ ( ) to confirm the setting. Press Black ( ) button to return.
AUTORUN SETTINGS V2010-05-14 C:/ The storage device automatically play after inserting. (supports only the root directory of the flie within the storage devices, the sequential: video, audio, photo) Language English Slideshow duration 1hour Slideshow mode Random Music repeat mode Repeat all Movie repeat mode Repeat one Autorun Off Default DEFAULT SETTINGS V2010-05-14 C:/ The DEFAULT - RESET allows you to reset all options to factory settings.
USB SETTINGS USB Select Media has 4 options : Photo, Music, Movie & file. Move cursor to using ubutton, then press “ENTER”/ ( ) to confirm the setting. Press Black ( ) button to return. PHOTO MUSIC MOVIE SELECT MEDIA PHOTO FILE PHOTO MUSIC MOVIE FILE PHOTO C:/ Select the Photo mode you desire using ubutton, then press “ENTER”/ ( ) to confirm the setting. After entering the “Photo” column, the photo file list of current directory is displayed in the USB Select Media content area.
MUSIC MUSIC C:/ select the Music mode you desire using ubutton, then press “ENTER”/ ( ) to confirm the setting. After entering the “Music” column, the music file list of current directory is displayed in the USB Select Media content area. Select music file by pressing qbutton , then press “ENTER”/ ( ) to play it. Press Black ( ) button to return. NEW FOLDER 1[1].
TROUBLESHOOTING SOLUTION PROBLEM IR remote inoperative Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. No sound or distorted sound Make sure your AV Source is connected properly. Make sure all cables are securely inserted into the appropriate jacks. If you are using the IR headphones, make sure you turn on the IR power.
REPLACEMENT PARTS SPECIFICATIONS Remote Control 136-5055 LCD Backlighting LED Wireless Headphones IR1CFF Resolution 2400 x 480 Pixels 1,152,000 Operation Temperature 32 ~149º F (0 ~ 55º C) Storage Temperature -4 ~ 176º F (-20 ~ 80º C) Backlit life 30,000 Hours Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimension LxWxH 10.6" x 9.65" x 2.0" 270mm x 245mm x 51mm Specifications are subject to change without prior notice.
APPENDIX A FLO TV Copyrights and Trademarks © 2009 Audiovox Corporation. All rights reserved. FLO, FLO TV and the FLO TV logo are trademarks of QUALCOMM Incorporated. QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. AUDIOVOX is a registered trademark of Audiovox Corporation. ADVENT is a registered trademark of Audiovox Corporation. MACROVISION is a registered trademark of ROVI Corporation.
FLO TV OPTION (P/N AVXFRK1) Your VOH10FR is designed for adding an optional FLO TV Tuner. If you do not have the FLO TV Tuner installed, this section can be ignored. To have the FLO TV Tuner added to your system contact the business that installed your VOH10FR. Activation/Subscription Information Your FLO TV module will need to be activated before you can begin enjoying the FLO TV service. Activation takes place after you subscribe to the FLO TV service.
FLO TV Introduction Please refer to the following as an overview to use the FLO TV service: 1. Turn the vehicle ignition key to the ON position. Turn on your VOH10FR and select the FLO TV source by pressing the Source button on the overhead or by pressing the FLOTV Button on the remote. (Note: Watching the FLO TV service for an extended period of time with the engine OFF will run down the vehicle's battery.) 2.
FLO TV Operation You can operate the FLO TV module with the wireless remote control. When FLO TV is powered on, the FLO TV logo screen will be displayed until the receiver tunes to a channel. This may take up to 30 seconds after the vehicle and overhead turned on. Upon power up, the FLO TV service will default back to the last viewed channel. If the screen does not appear press the Mode key on the remote control to switch back to FLO TV.
Are You Covered? FLO TV service coverage is available in many metropolitan areas and travel corridors within the United States. Please visit the FLO TV web site (www.flotv.com) to check the coverage maps in your area. If you are travelling in an area that is not covered by the FLO TV network or travel out of the areas covered by the FLO TV network the adjacent screen will be displayed: Once you have returned to an area covered by the FLO TV network, FLO TV programming will resume.
Remote Control Functions Function Symbol Use for channel changing (up/down), navigating menus, and selecting items pqtu OK (ENTER) Use to select a channel or setting Information key - use to display program information. Channel Guide - use to select the channel guide Back key - takes the user back one screen when in the Menu, Show Information, Show Description, or Guide.
How is FLO TV Programming Rated? Parental controls are built into FLO TV so that you can filter the program and movie content that can be watched on the FLO TV service. Adjacent is a ratings chart based on content type for TV program material and movie material: Movie ratings information, if provided, is available in the FLO TV programming guide.
Getting Around in FLO TV Watching the FLO TV service limits the channel information or pop-ups occurring while viewing the program as shown on the adjacent screen: If you want to see what channel you are on, press the adjacent screen and information will appear: o o o o o (Info) key and the Channel Logo Program Title Program Start Time Program End Time Program rating 29
Pressing the (Info) key again will display more information about the channel being viewed as shown in the adjacent screen: Information displayed: o o o o o o o Channel Logo Program Title Program Start Time Program End Time Program Rating Episode Title Episode Summary Pressing the (Info) key will return the viewer to the full screen.
FLO TV Program Guide You can access the FLO TV program guide by pressing the which displays the program guide: (Guide) key The FLO TV program guide is a matrix of programs and their start times, organized by channel. A user can view the guide and tune to a currently playing program or view program descriptions for future programs.
Notes ! Programs that are blocked due to Parental Controls display the locked icon. ! The channel logo column is not selectable. ! The guide loops vertically when you press the p (up arrow) or q (down arrow) key. ! The guide is bounded horizontally by time. The user cannot navigate into the past or beyond the amount of guide data available. ! Current program tuned is designated by darker cell color and vertical right color bar when not in focus.
Settings Menu Press the (Settings) key to enter the Settings Menu and the adjacent screen will be displayed: Parental Controls In the Settings Menu, the first selection is Parental Controls, which is highlighted in light gray. Press the ENTER key to access the parental controls menu.
Use the u (right arrow) key to highlight the parental on/off control and press OK to enable it or disable it. Once enabled, press the OK key and you will be prompted to create a PIN (Personal Identification Number) as shown in the adjacent screen: Use the remote control keypad to enter a 4 digit PIN. When the fourth digit is entered the adjacent screen will appear to confirm the new PIN.
Re-enter the same 4 digit PIN to confirm the PIN number. The adjacent screen will be displayed: (NOTE: Write the PIN down in a secure location. If it is lost you will have to call 1-888-99FLOTV to reset the PIN. The PIN cannot be reset online. Do not share your PIN with the person whose access to programming is being restricted.) Once you have set your PIN, you can now change the ratings limit on TV, Movies and Audio content.
Favorite Channels Up to 10 channels can be programmed into the numeric keys on the remote. Once they are programmed, pressing any one of them tunes your FLO TV to the channel that you have pre-programmed to the number key. If you have not pre-programmed favorites, when you press a numeric key, you will be prompted by the info bar at the bottom of the screen asking you if you want to add the channel to your favorites: To program favorite channels press the (Settings) key to access the settings menu.
Subscription Information In the Settings Menu, use the p (up arrow) or q (down arrow) key to highlight Subscription Information and press the ENTER key, the adjacent screen will be displayed: This screen tells you the basic information of your FLO TV system. (Note: The Authorization Code and Device ID will be different from the above screen, which is for reference only.
Legal Information Use the q (down arrow) key to highlight Legal Information. This information governs the terms and conditions of your use of the FLO TV service and the FLO TV network. To see the full text and the privacy policy go to www.flotv.com.
Troubleshooting Explanation FLO TV Screen Observed You are not subscribed and are not able to access any channel except the FLO TV channel. Unable to access any channel; you are out of the coverage area. You are either out of the coverage area or your FLO TV module has not updated the program guide information. The FLO TV Service will return to normal when you are back in the coverage area.
Troubleshooting (cont’d) FLO TV Screen Observed Explanation You are in a fringe coverage area; programming will return to normal when you are back in the coverage area. You are out of the coverage area; programming will return to normal when you are back in the coverage area. Contact the car dealer or the retailer where this product was installed or purchased.
Troubleshooting (cont'd) Problem Poor or No Video Root Cause FLO TV Input not selected Solution Change the source inputs on the overhead until the FLO TV signal is displayed. Wireless Remote Control does not work Batteries installed incorrectly Verify that the two AAA batteries are installed properly per the polarity markings. Batteries are dead Replace the two AAA batteries.
AUDIOVOX LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that, should this product or any part thereof (except game controllers), under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2010 AUDIOVOX Electronics Corp.
ADVM10FR 10.
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants.
FEATURES Congratulations Congratulations on your purchase of the ADVENT ADVM10FR DVD Player with Drop-Down Video / Monitor. The ADVM10FR has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1. FLO TV Control This control is direct local key to function with FLO TV. The mode LED will change from white to purple when the FLO TV is connected. 1 2 3 2. Infrared Transmitter and Sensor Transmits audio to wireless headphones, allows the remote control to operate the ADVM10FR and to control other accessories in the system. ON OFF AUTO 4 5 6 7 8 9 10 3. Dome Lights Provide additional interior illumination. 11 4.
7. ( + ) Button / CURSOR (u) Control a.) ( + ) Button • Press and hold the (P) button to adjust the control by + (increase). • Use these buttons for channel changing (up), navigating menus and selecting items in FLO TV mode. b.) CURSOR (u) Control This button is only active for USB mode. Selecting your favorite by cursor (u) and press “OK” button on your remote control or press ( ) button on unit. Information slide show will begin while playing your favorite file. 10.
ACCESSORIES WIRELESS HEADPHONES The ADVM10FR includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your wireless headphones.
AUX The AUX input may be connected to an external video source, video game system, or other audio/video devices. To access the audio / video inputs, turn the unit on and press the S (source) button on the ADVM10FR or the Source button on the remote control until "AUX" is displayed on the screen. IPOD Playback & Charging For iPOD playback & charging the unit must selected to AUX source and user can play the iPOD thru the AUX input and at the same time charge the iPOD thru the USB.
REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION 1 2 3 4 5 POWER MONITOR SELECT EJECT 36 M1 M2 FLO DVD DVD SOURCE 1 2 3 4 5 6 7 8 35 SOURCE FMM ON/OFF 6 34 FMM SELECT 7 IRT ON/OFF 8 9 10 11 12 13 0 DISPLAY RETURN 15 MUTE PIX SYSTEM MENU 33 32 31 30 29 OK 14 Battery Installation 9 VOLUME MODE SETUP MENU 28 16 Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down.
* Function control is available on the unit and the Remote Control. ** Function not available in this model. *** FLO TV function only available when optional FLO TV module is installed. Note: Refer to Appendix A FLO TV for FLO TV operating instructions.. 1. POWER Button* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT Button M1 Button – Sets the remote control code to allow control of the unit set to M1 mode.
8. IRT ON/OFF Button Turns the Infrared Transmitter ON or OFF for IR Wireless Headphones. 9. DISPLAY Button Press to display the current multimedia file information while the multimedia file is playing. 10. RETURN Button Press for return to previous page/ previous menu. 11. SYSTEM MENU Button Allow the user to access the system menu. Press cursor (pq) buttons to select desired PICTURE, FMM , OSD LANGUAGE, SOURCE DEFAULT FLO and SCREEN MODE during power up. 12.
15. MENU / SETTINGS Button a.) MENU Button Pressing the MENU button to display the HOME Page Menu. Note: Pressing the FLO TV button will access the FLO TV mode and disable the USB functions. b.) SETTINGS Button ( ) *** When in FLO TV mode the Settings button allows user to toggle the FLO TV settings menu on/off. 16. REPEAT Button Allows the user to repeat a selected repeat one / repeat all. 17. AUDIO Button Press to display and select Audio changing audio to L/R/ Stereo. 18.
22. PAUSE Button (II) Press to pause playback. Pressing the PAUSE button again or pressing the PLAY Button will resume normal playback. 23. PLAY Button* Press to activate the play mode while a multimedia file is loaded in the multimedia file compartment. 24. SCAN FORWARD Button (8) Press to search in a forward direction. Press repeatedly to change the search Speed from x2, x3, x4 times the normal speed. 25. NEXT Button (:) Press to skip to the next file or next page. 26.
28. MODE / SETUP Button a.) MODE Button When in FLO TV mode pressing the MODE button toggles between FLO TV and an auxiliary A/V source attached to the FLO TV module. (NOTE: your system may not have an auxiliary source). b.) SETUP Button When in DVD mode pressing the SETUP button will display the SETTINGS which allows the user to change the options such as Language, Slideshow duration, Slideshow mode, Music repeat mode, Movie repeat mode, Autorun & Default.
34. NUMBER Buttons** When DVD mode these buttons allow the user to enter numbers 0 to 9 for selection of selection of CD tracks, DVD chapters and password. When FLO TV mode these buttons allow the user to select favorite channels and for PIN entry for parental controls. *** 35. DVD Source Button** This button is only active when remote control is in DVD mode. Each time the button is pressed one of the sources (DVD or USB) will be selected. If the USB is not plugged in, the unit it will remain on DVD Source.
MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the PICTURE, FMM, OSD LANGUAGE, SOURCE DEFAULT FLO and SCREEN MODE. 1) 2) 3) 4) 5) Press the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen. Use the cursor buttons p or q to select the desired item in the main page and press the ENTER button to select. The sub menu will appear on screen.
FMM SELECT FMM ON/OFF options - Turns the FM Modulator on or off. FMM SELECT option - Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, Ch15 90.9MHz, CH16 91.
SOURCE DEFAULT FLO This allows the user to set the system default source to FLO. Note: • If selected default source is set to FLO every time the unit’s power is cycled with the source set to something other then FLO, the unit will power up and automatically switch the source over to FLO. • Unit will be set to Last Memory on as the default mode of operation. • Selection of Source default can only be made from within the system menu.
SETTINGS AND ADJUSTMENTS SETTINGS HOME 1. To set the desired option, move the highlight into the setup area using the cursor button u. 2. After entering the setup area, highlight the desired option using the cursor button q or u. 3. Press u to open the sub menu that contains the different options available. Press q or u to highlight the desired option, and press ENTER to confirm the selection. 4. Repeat steps 3~4 to set the options that reside on the same Home Page. 5.
SLIDESHOW MODE SETUP SETTINGS V2010-05-14 C:/ Select “SLIDESHOW MODE” using qbutton. The user can either select Random, Fading, Off, Bottom_To_Top, Top_To_Bottom, Left_To_Right, Right_To_Left, Door_Close, Door_Open, Hori_Cross and Verti_Cross, then select the Slideshow Mode you desire using ubutton, then press “ENTER”/ ( ) to confirm the setting. Press Black ( ) button to return.
AUTORUN SETTINGS V2010-05-14 C:/ The storage device automatically play after inserting. (supports only the root directory of the flie within the storage devices, the sequential: video, audio, photo) Language English Slideshow duration 1hour Slideshow mode Random Music repeat mode Repeat all Movie repeat mode Repeat one Autorun Off Default DEFAULT SETTINGS V2010-05-14 C:/ The DEFAULT - RESET allows you to reset all options to factory settings.
USB SETTINGS USB Select Media has 4 options : Photo, Music, Movie & file. Move cursor to using ubutton, then press “ENTER”/ ( ) to confirm the setting. Press Black ( ) button to return. PHOTO MUSIC MOVIE SELECT MEDIA PHOTO FILE PHOTO MUSIC MOVIE FILE PHOTO C:/ Select the Photo mode you desire using ubutton, then press “ENTER”/ ( ) to confirm the setting. After entering the “Photo” column, the photo file list of current directory is displayed in the USB Select Media content area.
MUSIC MUSIC C:/ select the Music mode you desire using ubutton, then press “ENTER”/ ( ) to confirm the setting. After entering the “Music” column, the music file list of current directory is displayed in the USB Select Media content area. Select music file by pressing qbutton , then press “ENTER”/ ( ) to play it. Press Black ( ) button to return. NEW FOLDER 1[1].
TROUBLESHOOTING SOLUTION PROBLEM IR remote inoperative Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. No sound or distorted sound Make sure your AV Source is connected properly. Make sure all cables are securely inserted into the appropriate jacks. If you are using the IR headphones, make sure you turn on the IR power.
REPLACEMENT PARTS SPECIFICATIONS Remote Control 136-5055 LCD Backlighting LED Wireless Headphones IR1CFF Resolution 2400 x 480 Pixels 1,152,000 Operation Temperature 32 ~149º F (0 ~ 55º C) Storage Temperature -4 ~ 176º F (-20 ~ 80º C) Backlit life 30,000 Hours Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimension LxWxH 10.6" x 9.65" x 2.0" 270mm x 245mm x 51mm Specifications are subject to change without prior notice.
APPENDIX A FLO TV Copyrights and Trademarks © 2009 Audiovox Corporation. All rights reserved. FLO, FLO TV and the FLO TV logo are trademarks of QUALCOMM Incorporated. QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. AUDIOVOX is a registered trademark of Audiovox Corporation. ADVENT is a registered trademark of Audiovox Corporation. MACROVISION is a registered trademark of ROVI Corporation.
FLO TV OPTION (P/N AVXFRK1) Your ADVM10FR is designed for adding an optional FLO TV Tuner. If you do not have the FLO TV Tuner installed, this section can be ignored. To have the FLO TV Tuner added to your system contact the business that installed your ADVM10FR. Activation/Subscription Information Your FLO TV module will need to be activated before you can begin enjoying the FLO TV service. Activation takes place after you subscribe to the FLO TV service.
FLO TV Introduction Please refer to the following as an overview to use the FLO TV service: 1. Turn the vehicle ignition key to the ON position. Turn on your ADVM10FR and select the FLO TV source by pressing the Source button on the overhead or by pressing the FLOTV Button on the remote. (Note: Watching the FLO TV service for an extended period of time with the engine OFF will run down the vehicle's battery.) 2.
FLO TV Operation You can operate the FLO TV module with the wireless remote control. When FLO TV is powered on, the FLO TV logo screen will be displayed until the receiver tunes to a channel. This may take up to 30 seconds after the vehicle and overhead turned on. Upon power up, the FLO TV service will default back to the last viewed channel. If the screen does not appear press the Mode key on the remote control to switch back to FLO TV.
Are You Covered? FLO TV service coverage is available in many metropolitan areas and travel corridors within the United States. Please visit the FLO TV web site (www.flotv.com) to check the coverage maps in your area. If you are travelling in an area that is not covered by the FLO TV network or travel out of the areas covered by the FLO TV network the adjacent screen will be displayed: Once you have returned to an area covered by the FLO TV network, FLO TV programming will resume.
Remote Control Functions Function Symbol Use for channel changing (up/down), navigating menus, and selecting items pqtu OK (ENTER) Use to select a channel or setting Information key - use to display program information. Channel Guide - use to select the channel guide Back key - takes the user back one screen when in the Menu, Show Information, Show Description, or Guide.
How is FLO TV Programming Rated? Parental controls are built into FLO TV so that you can filter the program and movie content that can be watched on the FLO TV service. Adjacent is a ratings chart based on content type for TV program material and movie material: Movie ratings information, if provided, is available in the FLO TV programming guide.
Getting Around in FLO TV Watching the FLO TV service limits the channel information or pop-ups occurring while viewing the program as shown on the adjacent screen: If you want to see what channel you are on, press the adjacent screen and information will appear: o o o o o (Info) key and the Channel Logo Program Title Program Start Time Program End Time Program rating 29
Pressing the (Info) key again will display more information about the channel being viewed as shown in the adjacent screen: Information displayed: o o o o o o o Channel Logo Program Title Program Start Time Program End Time Program Rating Episode Title Episode Summary Pressing the (Info) key will return the viewer to the full screen.
FLO TV Program Guide You can access the FLO TV program guide by pressing the which displays the program guide: (Guide) key The FLO TV program guide is a matrix of programs and their start times, organized by channel. A user can view the guide and tune to a currently playing program or view program descriptions for future programs.
Notes ! Programs that are blocked due to Parental Controls display the locked icon. ! The channel logo column is not selectable. ! The guide loops vertically when you press the p (up arrow) or q (down arrow) key. ! The guide is bounded horizontally by time. The user cannot navigate into the past or beyond the amount of guide data available. ! Current program tuned is designated by darker cell color and vertical right color bar when not in focus.
Settings Menu Press the (Settings) key to enter the Settings Menu and the adjacent screen will be displayed: Parental Controls In the Settings Menu, the first selection is Parental Controls, which is highlighted in light gray. Press the ENTER key to access the parental controls menu.
Use the u (right arrow) key to highlight the parental on/off control and press OK to enable it or disable it. Once enabled, press the OK key and you will be prompted to create a PIN (Personal Identification Number) as shown in the adjacent screen: Use the remote control keypad to enter a 4 digit PIN. When the fourth digit is entered the adjacent screen will appear to confirm the new PIN.
Re-enter the same 4 digit PIN to confirm the PIN number. The adjacent screen will be displayed: (NOTE: Write the PIN down in a secure location. If it is lost you will have to call 1-888-99FLOTV to reset the PIN. The PIN cannot be reset online. Do not share your PIN with the person whose access to programming is being restricted.) Once you have set your PIN, you can now change the ratings limit on TV, Movies and Audio content.
Favorite Channels Up to 10 channels can be programmed into the numeric keys on the remote. Once they are programmed, pressing any one of them tunes your FLO TV to the channel that you have pre-programmed to the number key. If you have not pre-programmed favorites, when you press a numeric key, you will be prompted by the info bar at the bottom of the screen asking you if you want to add the channel to your favorites: To program favorite channels press the (Settings) key to access the settings menu.
Subscription Information In the Settings Menu, use the p (up arrow) or q (down arrow) key to highlight Subscription Information and press the ENTER key, the adjacent screen will be displayed: This screen tells you the basic information of your FLO TV system. (Note: The Authorization Code and Device ID will be different from the above screen, which is for reference only.
Legal Information Use the q (down arrow) key to highlight Legal Information. This information governs the terms and conditions of your use of the FLO TV service and the FLO TV network. To see the full text and the privacy policy go to www.flotv.com.
Troubleshooting Explanation FLO TV Screen Observed You are not subscribed and are not able to access any channel except the FLO TV channel. Unable to access any channel; you are out of the coverage area. You are either out of the coverage area or your FLO TV module has not updated the program guide information. The FLO TV Service will return to normal when you are back in the coverage area.
Troubleshooting (cont’d) FLO TV Screen Observed Explanation You are in a fringe coverage area; programming will return to normal when you are back in the coverage area. You are out of the coverage area; programming will return to normal when you are back in the coverage area. Contact the car dealer or the retailer where this product was installed or purchased.
Troubleshooting (cont'd) Problem Poor or No Video Root Cause FLO TV Input not selected Solution Change the source inputs on the overhead until the FLO TV signal is displayed. Wireless Remote Control does not work Batteries installed incorrectly Verify that the two AAA batteries are installed properly per the polarity markings. Batteries are dead Replace the two AAA batteries.
ADVENT LIMITED WARRANTY Applies to ADVENT Mobile Video Products R AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that, should this product or any part thereof (except game controllers), under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2010 ADVENT,150 Marcus Blvd.
