Overhead With Integrated DVD/ USB/HDMI(HD) System Owner's Manual
Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position.
Congratulations Congratulations on your purchase of DVD Player with drop-down video / monitor. The MTG10UHD/MTG13UHD has been designed to provide passengers with unlimited content options delivering smiles for many miles. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
Table of Contents Features..............................................................................................................6 Controls and indicators diagram(front view)........................................ 7 Controls and indicators diagram(side view).......................................... 9 Remote Control Operation........................................................................10 Remote Control functions..........................................................................
Features • 10.1”/13.3” Digital Thin Film Transistor (TFT) Active Matrix Liquid Crystal Display LED Backlit Monitor • Built-in DVD Player • Last position memory for DVD Player • Six Audio / Video Source Inputs DVD, USB, AV, AUX, HDMI/MHL 1, HDMI/MHL or SmartStream. • USB 2.
Controls and indicators diagram (front view) 1. P OWER/SOURCE ( ) Button This button is used to turn the system on/off and to selcet the source . 2. Play/Pause (u/II ) Button This button is used to start playback of a disc or pause a disc. 3. DOWN / Previous ( ) Button Short press to select the source mode and system menu pages. Long press to select previous chapter or track during play the DVD. 4. MENU Select Button This button is used to display and select options on the system menu. 5.
Controls and indicators diagram (front view)-Continued 6. STOP (n) Button -Press the STOP button once: Stops playback. - Pressing the PLAY button again will resume normal playback from where movie was stopped. - Press the STOP button twice and then press the PLAY button to start playback from the beginning of the DVD. 7. EJECT ( ) Button This button is used for ejecting a disc from the disc compartment. 8. Dome Lights Provide additional interior illumination. 9.
Controls and indicators diagram (side view) 1. D VD Disc Insertion Slot For loading and removing discs. When a disc is inserted, the unit will automatically turn ON and switch to DVD source. Insert a disc with label side facing up. Note: The disc slot indicator is red when a disc is inserted and green when the disc slot is empty. 2. AUX IN This jack is used to supply external audio and video inputs to the unit. 3. USB INPUT For connection of a USB memory device.
Remote control operation Battery Replacement 1. Remove the battery cover. 2. Insert two AAA batteries into the battery holder. Be sure to observe the correct polarity. 3. Reinstall the battery cover into the battery holder until the holder is click .
Remote Control functions 11
Remote Control functions(Continued) * Function control is available on the unit and the Remote Control. ** Function not available in this model. 1. POWER* Press this button to turn the unit ON and OFF. 2. SOURCE* Press to display the Source OSD for DVD, USB, AV, AUX,HDMI1 and HDMI2. 3. DVD Source** No function on this model. 4. DVD Mode Select Button Switches certain function keys on the remote control for DVD function. 5.
Remote Control functions(Continued) 13. SCAN BACKWARD ( ) Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times and normal speed. 14. SCAN FORWARD ( ) Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times and normal speed. 15. PREVIOUS ( ) Press to return to the previous chapter or track. 16. NEXT ( ) Press to skip to the next chapter or track. 17.
Remote Control functions(Continued) 22. FM MODULATOR CHANNEL SELECT (C)** No function on this model. User may use the system menu to select the FM Modulator. 23. FMM ON/OFF Turns the FM Modulator power on/off. 24. AUDIO Press to display and select audio language in DVD mode. Each time this button is pressed, the language changes. 25. P IX ( Picture Select )** No function on this model. 26. VOLUME DOWN (-) or UP (+)** No function on this model. 27. STOP (n)* Press to stop playback.
Turning the unit on or off 1. Push in the Screen Release button to unlock the LCD screen. The screen will drop down slightly. 2. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 3. ress the power button on the unit or the remote control to turn the system on and off. P When in use, the internal backlighting will illuminate the controls. 4.
Source menu The System is capable of accessing six source inputs. To select or change a source, press the source button on the front panel or the Source button on the remote control. The source OSD will appear on the screen as shown in the figure below. Use the ＋ or － cursor buttons on the front panel or the p or q cursor buttons on the remote control to highlight a source. Press the Source button on the front panel or the OK button on the remote control to select the desired source.
Source menu(Continued) HDMI 1 & HDMI 2 These Source inputs allow the user to enjoy high-definition digital images and high-quality sound by connecting a HD device such as a Blu-ray player or smartphone with an HDMI output to the system. The HDMI inputs also allow the user to connect with a Mobile High-Definition Link (MHL) mobile phone. Connect your HDMI/MHL device with an optional HDMI cable. Smartphones and Tablet require the appropriate adapter for your smart device.
System Menu Setting and Adjustments The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display or set up PARENTAL controls to control DVD playback for children. Using the System Menu 1. Press the System Menu button on the remote. The System Menu appears on the screen as shown in the figure below. There are 6 icons that will appear individually in the upper left hand corner of the System Menu as each option is selected.
System Menu Setting and Adjustments(Continued) 7. If without a Remote control user can use the local key to select the function setting. a.) Menu = Long press to call up the setup menu screen information or return/exit the system menu = Short press function as Down Key b.) u/II Play = Enter Key c.) = Left Key d.) = Right Key PICTURE CONTROL The PICTURE setup functions allows the user to select and set the picture control function. PICTURE BRIGHTNESS, CONTRAST, COLOR adjustments range from 0 to 32.
SYSTEM SYSTEM FMM PLAYER PLAYER SMART STREAM FMM FMM MOVE ADJUST MENU EXIT MOVE SELECT MENU EXIT FMM SMART STREAM MOVE ADJUST MENU EXIT SMART STREAM System Menu Setting and Adjustments(Continued) IRT PICTURE L/R IRT ON SYSTEM MODE PICTURE The system setupAUDIO function allow the user to select SYSTEM the system function. Functions listed below.
PICTURE AUDIO DEFAULT DVD ON MONITOR MODE M1 RESET SYSTEM PLAYER FMM System Menu Setting and Adjustments(Continued) SMART STREAM RESET The RESET functions allows all settings options to be reset to factory settings.
TVSYSTEM SYSTEM TV PICTURE PICTURE AUDIO AUDIO ASPECTRATIO RATIO ASPECT 16:9 16:9 PICTURE PICTURE ADULT ADULT SYSTEM SYSTEM ON ON PLAYER PLAYER 4:3 LB (Letter Box) Displays the content of theTVDVD title in the 16:9 SYSTEM SAVER aspect ratio.The black bars SCREEN will appear at the top PICTURE ASPECT RATIO and bottom of the screen.
System Menu Setting and Adjustments(Continued) LAST MEMORY SYSTEM DVD playback The last memory function TVallows SCREEN SAVER to begin from the point when playback was last PICTURE ASPECT RATIO AUDIO stopped. The last memory feature allows the user to PASSWORD SETUP SYSTEM RATING turn the last memory feature function on or off.
System Menu Setting and Adjustments(Continued) FMM MODULATION(ON/OFF) This setting allows you to turn the FMM modulator ON or OFF. 16 MENU 16 16 0 2. ADJUST MENU L/R Press the DVD88.1MHz button toIRTrestore the remote control to DVDPICTURE functions. MOVE SELECT MENU ON EXIT EXIT PLAYER PLAYER FMM MENU SMART STREAM SMART STREAM 88.1MHz PICTURE EXIT MOVE SELECT FM MODULATION FM88.1MHz MODULATION 91.1MHz FMM CHANNEL 91.3MHz 88.3MHz FMM CHANNEL 91.5MHz 88.5MHz 88.7MHz 88.9MHz 89.1MHz 89.
Playing DVD and Audio Discs Playing DVDs When a disc is loaded. Press the DISPLAY button on the remote control to display the status banner. The status banner includes the disc title, chapter audio language , subtitle & angle. Title Selection: Some DVDs contain more than one title (e.g. sitcoms, collections, etc.) Press the numeric (0-9) buttons to initiate a change of chapter title selection. Using the repeat feature to select OFF, Chapter, Title and Repeat All to play the movies contents.
Playing DVD and Audio Discs Use the cursor keys p q t or uand OK to navigate the on screen menus. The USB port can play AUDIO, PHOTO, VIDEO . The following formats are supported: Audio • MP3 • WMA • AAC Photo • JPEG • BMP Video* • AVI (MPEG4-DIVX (DIVX 4.0/5.
DVD Basics To get the optimum use out of the DVD Player, please read the following: DVD Region Code The DVD player is preset to a region code at the factory depending on where the DVD player is sold. A DVD from a different region cannot be played in this unit and the unit will display "WRONG REGION”. Region 1- USA, Canada Region 2- Japan, Europe, South Africa, Middle East, Greenland Region 3- S.
DVD Basics HDMI (HDMI/MHL) An HD Input is located on the side of the unit. This input can be used for devices with HDMI or MHL output ports (such as smartphones, tablets and HDMI devices) and may require the purchase of an HDMI cable and HDMI adapter which is available from your device manufacturer. Each device has unique requirements, please consult with your device or smartphone manufacturer to determine which type of output your device supports.
HDMI Devices HDMI Devices **: Amazon FireTV Stick streaming device: • www.amazon.com and search for FireTV Stick Chromecast media streaming device: • www.google.com and search for Chromecast Roku HDMI streaming device: • http://www.roku.com/products/compare MHL devices**: Roku MHL Streaming Stick • http://www.roku.
USB Inputs USB1 Port(User Accessible) The USB port provides two functions: 1. Media port for USB thumb drives: 2. charging: • The USB port will not charge a portable device when the unit is turned OFF. • The USB port will charge a portable device in the following modes: • DVD/USB (Not recommended) • AV • AUX • HDMI/MHL • It will not charge in USB mode. • For Apple /Android Mobile , It will charge at up to 2 Amps of charging current.
Troubleshooting PROBLEM IR remote inoperative SOLUTION • Verify that the battery in the remote is fresh. • Verify that the remote sensor eye is not obstructed. Disc won't play • Insert a disc with the label side facing the viewer. • Check the type of disc you put into disc tray. This DVD only plays DVD, audio CD and MP3s. • Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played.
Specifcaitons Type TFT Active Matrix LCD Resolution 1920 (RGB) (X3) x 1080 Pixels 6,220,800 Operation Temperature 32 ~ 113º F (0 ~ 45º C) Storage Temperature -4 ~ 149º F (-10 ~ 65º C) Backlit life 20,000 Hours Video Display System NTSC / PAL / AUTO Video Output 1.0Vp-p @ 75 ohms Power Source 12VDC Dimension (L x W x H) 375mm x 330mm x 77mm 14.8in x 13.0in x 3in Specifications subject to change without notice.
12 MONTH LIMITED WARRANTY Applies to Movies To Go Mobile Video Products V O X X E L E C T R O N I C S C O R P.
www.voxxelectronics.com © 2016 Voxx Electronics Corp.
