User's Manual

6
SIDE VIEW
CONTROLS AND INDICATORS DIAGRAM
The ADVDLX10 has an option that allows the user to select from two IR
transmit and receive codes (M1 or M2). This feature can be used when
using two ADVDLX10s in the same installation or if the vehicle has a RSA
(Rear Seat Audio) that uses an “A” channel headset. The ADVDLX10
comes factory set to M1. When in the M1 mode, the unit will respond to
remote commands when M1 is selected on the remote control and will
transmit audio on the A channel. When in the M2 mode, the unit will
respond to remote commands when M2 is selected on the remote control
and will transmit audio on the B channel.
Note: Use 2-channel IR headphones set to CH B when the monitor is
set to M2 mode.
Note: M1 will appear on the screen for 4~5 seconds.
Selecting a Monitor Code (M1 or M2)
1. Power ON the unit and wait until M1 on the OSD appears. M1 will
appear on the screen for 4~5 seconds.
2. To change the monitor code from M1 to M2, press the System Menu
and select the monitor mode to M2.
3. To change the monitor code from M2 to M1, repeat the System Menu
select the monitor mode to M1.
FMM 88.3MHz
M1
DVD
IRT ON
1. DVD Disc Insertion Slot
For loading and removing discs. Unit will turn ON and load
disc when disc is inserted. Insert disc with label side facing
up.
Note: Disc slot will be lit when unit is turned OFF for easy
loading at night.
2. AUX IN
The Jack is used for audio and video input.
3. USB INPUT FOR USB MEMORY DEVICE
Allows for the connection of an USB or memory device.
2 3
1
M1
M2
MONITOR MODE
SYSTEM MENU
OSD LANGUAGE
DEFAULT DVD ON/OFF
SCREEN MODE
FM MODULATOR
MONITOR MODE
FMM 88.3MHz
M2
DVD
IRT ON