Manualshelf

User`s manual

ManualsBrandsActidata ManualsComputer equipmentactiNAS cube RDX
919293949596979899100
/ actiNAS Manager · Network
92
4. In Windows screen, check the Enable Domain Authentication option. Configure the necessary
options.
o If Domain Server IP is automatically detected, the Domain Server IP will be
displayed. If you want to join NAS to a specific Domain Server IP, remove the
check mark in Auto Detect Domain IP and manually enter the Domain Server IP
address.
o Enter the Domain Administrator account.
o Enter the Domain Administrator’s password.
o Select the PDC/ADS mode.
o Click Save when done.
Windows Domain Authentication Options
Enable Domain
Authentication
Use this option to enable or disable Windows Domain Authentication.
Host Name
Indicates the NetBIOS name of NAS as configured in Network Device Configuration tab.
Domain/Workgroup
Shows the domain/workgroup name as configured in Network Device Configuration tab.
DNS Suffix
Shows the DNS Suffix as configured in Network Device Configuration tab.
Domain Server IP
Shows the IP address of the domain server which is automatically detected when Auto
Detect Domain IP option is enabled. If Auto Detect Domain IP option is disabled, manually
type the domain server IP address.
Logon Administrator
Enter the administrator’s logon account in the domain server.
Password
Enter the password of administrator’s logon account in the domain server.
PDC/ADS Mode
Select the mode type of the domain server. This can be ADS (Windows 2003/2008 Server)
or PDC (Windows NT Server).
Enable NTLMv2
Authentication
This parameter determines whether or not smbclient will attempt to authenticate itself using
the NTLMv2 encrypted password. If enabled, NAS will only sent NTLMv2 and LMv2
responses. NTLMv2 authentication protocol is available only on WindowsNT4 with SP4 and
Windows 2000 or later. Default is disabled.
Enable Client Channel
This controls whether the client offers or even demands the use of the netlogonschannel.
Default is auto, means it offers the schannel but does not enforce it.
Reset
Use this button to undo or clear any changes made.
Save
Use this button to save the changes made.