User`s manual

Storage/Share · / actiNAS Manager

Setup Volume as iSCSI Target

Steps to Setup Volume as iSCSI Target:

1. Click the iSCSI button of the Volume to be setup.

2. A dialog box will be displayed. Tick the iSCSI Enable option to enable iSCSI function. Enter the

Target name. To enable authentication, tick the Enable box in Authentication then enter an

Account name. Enter the password in Password box and Password Confirm box. Click OK when

done.

NOTE: When Authentication is used, the same Account and Password must also be used in iSCSI initiator to

successfully connect to the NAS iSCSItarget device. Password length must be 12 to 16 characters.

NOTE: By default, the iSCSI Volume (LUN) write cache option is disabled. To enable write cache on iSCSI target

LUN, tick the Enable Write Cache option.

3. A warning message will be displayed. Select Yes to proceed.

4. Another warning message will be displayed. Select Yes to proceed.