User`s manual

Storage/Share · / actiNAS Manager

Join a Disk to Storage Pool

Steps to Join a Disk to Storage Pool:

1. Click Join Disk.

2. A dialog box will be displayed. Select a RAID logical disk (an unused/newly created RAID disk) to

be joined to the Storage Pool of NASVG. Click OK when done.

NOTE: If a new (UN_USED) RAID logical disk has not been created yet, create first the RAID disk using the

available free physical disk drives.

3. The RAID logical disk will be joined to the NASVG.

NOTE: An un-used physical disk drive can be used to join to the Storage Pool of NASVG but it is not

recommended because the physical disk drive does not have RAID Level nor provide data redundancy. Select

only a RAID disk to add into the Storage Pool for better data security.