User`s manual

/ actiNAS Manager · Storage/Share
32
RAID Configuration Screen
Name
The RAID disk name. This defaults to RAID_00 if this is the first RAID disk created
LEVEL
The RAID level used by the RAID disk
Disk Used
The hard disk drives (slots) joined to the RAID disk
Total Size (GB)
The capacity size of the RAID disk
Status
The current status of the RAID disk. Status can be active, degraded, rebuilding, or failed
RAID Configuration Options
Create New RAID
Use to create a RAID disk using the hard disk drives
Edit RAID
Used to edit an existing RAID disk, such as extend the RAID (add another hard disk drive).
Disk Information Screen
Slot
The hard disk drive slot number
Disk
The hard disk drive device name. The first disk drive is named /dev/sda
Size (GB)
The capacity size of the hard disk drive
Model
The hard disk drive model name
Status
The current status of the hard disk drive. Status can be RAID_MEMBER, UN_USED, or
SPARE
Disk Information Options
Disk Smart Test
Use to perform SMART test on a selected disk drive
There are two types:
 Long Test - does extended/in-depth test on the disk drive which can run in about an
hour (more or less 60 minutes).
 Short Test – does short test on the disk which can run in more or less 2 minutes.
Umount
Use to un-mount a disk
Set Spare
Use to set a selected hard disk drive as a Spare Disk
Delete Spare
Use to remove the Spare Disk setting on a hard disk drive
NOTE: To display the SMART Information of a disk drive, double-click on the disk drive in the Disk Information
list.