User`s manual

Getting Started with the NAS System · Installation

2. Configure the Storage/Share.

a) Change the home size default capacity if needed.

b) Rename the default share if necessary.

NOTE: The share folder name does not allow space in-between characters.

c) Change the size of the default share if needed.

3. Configure the Network Adaptor settings. Select DHCP option, or configure static IP.

a) Enter the new NAS Host Name in the Host Name box.

b) Enter the new IP address.

c) Edit the Subnet Mask and Gateway.

The configuration options in Network Adaptor:

 Host Name

The Host Name is the NetBIOS name of NAS system. This name should be unique.

 IP

This is the IP address of primary Ethernet port LAN0 (eth0) used for NAS management or share

folder access. If not set or no DHCP server, it will use the default IP 172.16.0.1.