User`s manual

105
System · / actiNAS Manager
System
The System function is used to configure different NAS system settings and services, such as: Service
configurations, Date and Time Zone setting, Serial Port setting, NAS Firmware Upgrade, Reboot and
Shutdown functions, Log Information, Event Notification via email, and various System Tools.
System Information
The System Information screen shows the following:
Host Name
Indicates the NetBIOS name of NAS as configured in Network  Device Configuration
Domain/Workgroup
Shows the domain/workgroup name as configured in Network  Device Configuration
Version
Shows the NAS firmware version
Time
Shows the NAS system time and time zone
Model
Shows the NAS system model
CPU
Shows the NAS system processor type
Memory (KB)
Shows the amount of NAS system memory (RAM) in KB
Kernel Ver.
Shows the NAS kernel version
Languages
Choose the preferred language from available options: English, Traditional Chinese,
Simplified Chinese, Japanese, Korean, and Spanish
Skin
Shows the color schemes available as skin color. Current options are: Black, Blue (default),
and Green.
Enable Timeout
This is enabled by default. When there is no activity in the actiNAS Manager GUI, admin will
be automatically logged out after 15 minutes. To disable timeout, remove check mark in
Enable Timeout.
Enable Internal RDX
Backup
If enabled then backup to RDX in Data Backup available. Disabled shows only remote and
local disk backup functionality
Device
Shows the device information such as Slot number, system fan, CPU fan, CPU temperature,
and motherboard temperature.
Status
Shows the current status of each device, such as slot temperature, system fan and CPU fan
speed in RPM, and CPU and motherboard temperature reading.
The System Information screen also shows the number of disk drives detected by the NAS system. The
device icon is green when device is in good condition, and shows red when device is failed.