Setup guide

Part 2: Connecting to NAS Management GUI and Using Quick Setup

NOTE: The NAS Management GUI requires Adobe Flash Player to be installed in the remote

computer that will be used to manage the NAS.

NOTE: Quick Setup will use all available disk drives as RAID members. If you want to configure a

hot spare in Quick Setup, remove the disk drive that will be designated as hot spare. When Quick

Setup process is completed, reinsert the unused disk drive. It will automatically become the hot

spare disk.

1. Open web browser in a remote computer.

2. Type in the address field the IP address of eth0 (check LCD display for the current IP address)

followed by port 3000.

Example: http://192.168.1.222:3000

3. The actiNAS Login page will be displayed.

4. Enter the Login Name and Password. Click “Login”.

NOTE: If the system initially has no NAS configuration (settings are factory default), after login to

GUI, the Quick Setup option will be displayed.

Entity

Default

admin

Password

00000000