Setup guide

!
!
Part 1.1: Manually changing network settings of eth0 to suit your LAN.
a. Press the Down button . The LCD will show 00000000 as Password (default).
b. Press the Select button several times to select eight zeros until the Network Information menu
is displayed.
• Press the Select button . The LCD will show “eth0 IP” and “172.016.000.001”.
• Press the Select button . The LCD will display “Set eth0 IP”. The first number in the IP
address is highlighted.
c. To change the number, press or . When completed, press to move to the next
number. If the number does not have to be changed, just press to move to the next number.
Repeat step (c) to change all the other numbers in the IP address.
d. The LCD will display “Submit Network Setting (Yes/No)”. Press to save the setting. It will go
back to eth0 IP.
e. Press . The eth0 Netmask will be displayed.
• Press to modify eth0 Netmask. The LCD will show “Set eth0 Netmask”. The first
number is highlighted.
f. To change the number, press or . When done, press to move to the next number.
• If the number does not have to be changed, just press to move to the next number.
• Repeat step (f) to change all the other numbers in the Netmask.
g. The LCD will display “Submit Network Setting (Yes/No)”. Press to save the setting. It will go
back to eth0 Netmask.
• Press a few times until the Gateway_0 option is displayed.
• Press to modify Gateway. It will show “Set Gateway_0” and the first number is
highlighted.
h. To change the number, press or . When complete, press to move to the next
number.
• If the number does not have to be changed, just press to move to the next number.
• Repeat step (h) to change all the other numbers in the Gateway.
• The LCD will display “Submit Network Setting (Yes/No)”. Press to save the setting. It
will go back to Gateway_0.
• The eth0 network configuration is set. Press EXIT twice to go back to the main menu.