Quick Installation Guide

www.acti.com
INSTALLATION & CONFIGURATION GUIDE
8
Please refer to the following steps for Configuration settings
1. Click “Configuration”
2. Click “Rule”
3. Check “Rule”
4. Click the “Polygon” button. Drag the mouse to set the recognition range on
the screen; right-click to end the range setting.
5. Click the “Square” button. Drag the mouse to set the detection range on
the screen. The identify box should enclose the eyes down to the nose
only. The distance value of this range will be auto-generated and shown
on “Min. Pupil Distance”.
6. Click “Save” for the settings.
Please refer to the following steps for Face Picture Library settings.