Quick Installation Guide

www.acti.com
INSTALLATION & CONFIGURATION GUIDE
3
Examples of unsuitable scenarios:
Backlight Insufficient Light
Installation Height Requirements
1. The camera should be installed in the front of the passageway where it can
capture the face. The horizontal tilt angle of the camera must be less than <
25 °.
2. The camera installation must be elevated. This is to avoid the situation where
a face is obscured by the person in front of him in case they go through the
passageway closely one after the other. The vertical elevation angle should
be within: α=15±5°.
3. The covered Pupil Distance (PD) pixels must be greater than 40 pixels to
distinguish the face details from the captured image. The practical width of
detection area should be less than or equal to 3 meters with a 2MP camera.