User`s manual

www.acti.com

Encoder Firmware V4.09.22 User’s Manual

Once the process is finished, the progress bar will show the upgrading as OK, and reboot the

IP device system.

NOTE: If you cancel the firmware upgrade during upgrade process, the browser

window will be closed

Profile Upload

Profiles are sets of parameters that control how the image sensor behaves. Sometimes profiles

are fine-tuned again to suit a specific environment, or for generally better image. They are not

updated as frequently as firmware, and a good profile can stay in use for a very long time.

Occasionally, you may wish to load a new profile pack into your camera. This section tells you

how to upgrade IP Camera‟s Profile Pack.

Click the [Profile Upload] item to display the “Profile Upload Page”.

STEP1: Click [Apply] button. The „‟Profile Pack Page-2” will be displayed as below.