User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
71
Column
Description
System info
It shows the firmware version, MAC address, production ID, and factory
default type of IP device.
WAN status
It shows the WAN port‟s IP address, netmask, gateway, DNS server,
DDNS host and connection status.
System log
It shows the system event. This column is very useful to as a diagnostic
tool.
Click [Parameter List] where you may see all configurations of the IP device.
Click [Server Report] to export related information of the IP device while reporting a
support to your support channel.
Factory Default
Click the [Factory Default] item to display the “Factory Default Page”.
If you want to keep network settings and restore other settings to factory default, please click
radio box . If you click instead, all the settings would be lost. You will have to use factory
default IP setting to connect to this camera. Please refer to previous login section.
If you want to reset all setting to default, click to select this radio box .
Click the [Apply] button to show a warning dialog that reminds you again before restoring the
device to factory default.