User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
60
*Pre-requisites: SMTP server / FTP server / HTTP CGI server setup.
Upload Video/snapshot
IP devices may send video recording / snapshots to your chosen server upon event. Video will
be in .RAW format, while snapshots will be .JPG files. You can define up to three group of
settings to upload video/snapshot. Snapshots can be sent to FTP / HTTP CGI and via Email,
while video can only be uploaded to FTP or HTTP CGI servers. If Audio in is enabled in device,
the uploaded video will include audio.
The parameters needed to setup this function are different for each task combination
(snapshot / ftp or video / HTTP… etc), and are explained below:
Enable Video/snapshot checkbox: this decides if this rule is in effect, or disabled. Sometimes
it is useful to keep the settings, but not to enable it for troubleshooting purposes.
Upload Media to: these define the task at hand, and change the field that needs to be filled
out.
Enable
UI
Upload Media Type
Snapshot
Video
Upload Media to
Email
FTP
CGI
FTP
CGI
Upload Period
Y
Y
Y
Y
Y
Image during
Upload Period
Y
Y
Y
Pre-Buffer Time
Y
Y
Image File Name
Y
Y
Y
Y
Y
Upload Path
*
Y
Y
Y
Y
CGI Path & Program
Y
Y
E-Mail Recipients
Y
Subject
Y
Video Source
Y
Y
Y
Y
Y