User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
54
To setup SMTP servers, make sure to enable the SMTP account and choose the
proper Authentication type. There are many types available. The default is Login. We
recommend you to use Auto Detection. Available authentication types include: Auto Detection,
None, Login, Plain, Cram MD5, Digest MD5 and PoP Relay. Please also enter the User
Name, Password, the email address displayed as sender (can be different than the
user name), Network (SMTP server) address, Network (SMTP server) Port number and
Max Connection time before timeout (in seconds). Click [Apply] to use these settings or
click [Reset] to clear changes.