User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
53
FTP Server
FTP servers can receive snapshot or video uploads that are issued as part of the response
from event handlers. You may setup one FTP server.
To setup FTP servers, make sure to enter the network address, the Network (FTP)
port, the User Name, Password, Connection mode (Passive or Active) and
Connection time before timeout(in milliseconds). Click [Apply] to use these settings or
click [Reset] to clear changes.
SMTP Server
SMTP servers can send email upon request from the IP device. The email can be a simple
subject and text email, or attached with snapshot / video. You may setup two SMTP servers.
The device will first attempt to send the message via the Primary email SMTP server. If the first
attempt fails(after the Max connecting time), then the device will attempt to send via the
secondary SMTP server. If the device sends email successfully via the primary SMTP server,
then it will not use the secondary SMTP server.