User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
46
Click the [Apply] button to confirm the settings or click the Reset] button to re-enter
the parameters.
Exposure / White balance
Line Frequency
Change settings between 60Hz or 50Hz, depending on
the AC power type of your region..
WDR Mode
This determines if the WDR processing is turned on or
off. Turn this on only when you have very large
brightness differences in a single scene. Otherwise
leave it off.
WDR Level
The strength of image modification by WDR algorithm.
Increasing this will increase the effect of WDR
processor.
Exposure Mode
Select exposure mode to auto or manual.
1. Auto: The IP camera will adjust the exposure
automatically.
2. Manual: Manually select the Exposure
Gain and Shutter Speed below.. Day and