User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
29
Speed & Duplex
Click the [Speed & Duplex] item in the network section to display the”Speed and Duplex” Page.
Refer to the table below for how to configure each setting.
Parameters
Description
Network
speed
This item lets you select the network transmission speed. You
can select from
1. Auto detect (default setting)
2. 100Mbps / Full duplex
3. 100Mbps / Half duplex
4. 10Mbps / Full duplex
5. 10Mbps / Half duplex
Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter
the parameters.