User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
19
Network Section
Click the [Network] item on the “Setup Page”.
IP Address Filtering
Click the [IP Address Filter] item to display the “IP Address Filtering Page”. Refer to the table
below for how to configure each setting.
WARNING: Please be very careful when using this function, as you may lose access
to your camera if you make mistakes in setup. You may either accidentally deny
yourself access, or forgot to include your own IP address in the allowed address list.
You will need to perform hard reset to be able to access the device again.