User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
16
Host
Click the [Host] in Setup to enter Host settings page. Refer to the table below for how to
configure each setting.
Parameters
Description
Host name
Enter a host name, and this host name will be shown when you
use the IP utility or the SDK to search for the IP device.
Language
Select the language of default user-interface. Each user login will
see the default user-interface first.
Camera name
The camera name is reserved for customer use.
Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter
the parameters.