User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
14
Audio out
Click the icon to enable the audio out from PC to IP camera
or video server. When it is enabled, your voice will be transferred to
the audio out of the IP camera or video server.
NOTE: you will need to have a microphone connected to your PC to
do that.
Media
If dual stream mode is enabled, click to select which stream to
display (Media 1 or 2). The default is single stream only. To change
to dual stream mode, please refer to “Media 1” section under
“Setup” tab
Encoder Type
Click to select the compression codec used in video
encoding. The Encoder type option includes MPEG-4, MJPEG and
H.264. Once selected, the video server/IP camera will start to send
video in new stream type.
Display size
Click or of to adjust display screen size
Audio in
Click the icon to mute or the icon to receive audio
in from the video server/IP camera. Drag the volume bar
to adjust the volume.
Digital Zoom
Digital zoom enables you to zoom into the image. You can click
to zoom in and click to zoom out. You can click
the “no zoom” button to cancel all zoom-in and go
back to original status (no zoom status).
When you digitally zoom in the video, you can click to
pan/tilt the video up, down, left and right. NOTE: This pan/tilt
function does not work if the video is not zoomed-in (no zoom
status).