User`s manual

www.acti.com
Encoder Firmware V4.09.22 User’s Manual
10
STEP7
Click the “Use the following IP address” radio button and enter the IP address and the subnet
mask.
STEP8
Click the [OK] button and the window dialog box will close.
Please set the settings as below.
IP address: 192.168. 0.xxx
Subnet mask: 255.255.255. 0
(NOTE: xxx should be a number
from 1 to 254 except 100, which is
used by the IP device. Please also
make sure that no two equipments
use the same IP address in the
same network.)