Manual

www.acti.com
Firmware User’s Manual V6.09.45
72
Image
The section Image allows user to control certain parameters of a video frame.
For D / E / B Series
For I-Series Only
Parameters
Description
Video Flipping / Video
Mirroring
Check this box to flip the video up-down and left-right to achieve the
180-degree rotation effect.
Brightness
Select the Brightness value (0~100). The higher the value, the
brighter the image.
Contrast
Select the Contrast level from following options: Lowest, low, medium,
high, highest
Saturation
(for I-series only)
Saturation makes colors appear more vivid. Select the Saturation
level from the following options: Disabled, low, medium, high, highest.
Digital Noise
Reduction
Turn ON or OFF the Digital Noise Reduction. When turned on, the
noise on the video (especially in low light) is reduced and image will
look smoother and clearer.
WDR
Choose the WDR level from following options: Disabled, low, medium,
high, highest.
NOTE: WDR is disabled and will not appear on screen if Exposure
Mode is set to “Manual”. See Exposure / White Balance on page 74.
3D Noise Reduction
(for I-series only)
Enable this feature for smooth and clear image. Disable this feature if
the scene contains extreme details that may be smoothed over with