Manual

www.acti.com
Firmware User’s Manual V6.09.45
60
Stream Mode: Dual (for Hemispheric Cameras only)
The Dual view mode of the Hemispheric cameras simply streams a 180° panaroma view for
cameras mounted on the wall, in this case, the Mounting Type must be set to Wall. If the
Mounting Type is set as Ceiling or Ground, the video is streamed with a 360° panorama view.
Stream Mode: ePTZ (for Hemispheric Cameras only)
The ePTZ mode of Hemispheric Cameras works in similar way as optical PTZ function in Speed
Domes. As the camera receives commands from remote client, it changes the direction of the
view or zooms in or out digitally. The stream coming out from the camera represents the current
viewing direction of the camera, not the panoramic view.
If you are using hemispheric camera in ePTZ mode,
this screen is available by clicking on ePTZ button in
the live view screen. Mouse PTZ is enabled at the
same time.
You can configure up to 32 Zoom presets below. Just
click Set, enter the name and move position to what
you desire, then click set again. You can instantly ask
the camera to go to that zoom and focus position by
clicking on the Goto button.
Click Delete to remove this zoom preset point from
camera memory.
You can use ePTZ in live view by moving the mouse
over video and clicking on the video anywhere you
like. Wherever you click, that point will become new
“center” of the view. This is how you “pan” and “tilt”.
You also can rotate the view via PTZ panel if you like.
To zoom in or out under ePTZ mode, use the scroll wheel of the mouse