Manual

www.acti.com
Firmware User’s Manual V6.09.45
25
How to Set the Home Position
1. Pan, tilt, and zoom on the area that you want to set as the home position.
2. Click the Apply button on the Save current position as home position.
How to Set Serial Hex Command Protocol
ACTi cameras and video management systems fully support the URL Command, a high level PT
command set. However, in case the cameras will be used with devices from third party vendors
that only support Serial Hex Command (low level PT command set), users must select the PTZ
Vendor/Protocol to use and its address. Otherwise, leave the default settings.
How to Adjust the Focus
After zooming the camera in or out, it is recommended to readjust the focus in Focus Control.
Options are:
 Auto Refocus after Zoom: Select this option to let the camera automatically adjust the
focus after zooming.
 Manual: Select this option to manually adjust the focus. This feature is useful if the
automatic focus position is not the position that the user wants to achieve. To adjust the
focus manually, select the Step Size and then click the step focus in or focus out
icons until the desired focus is achieved.
When an option is selected, click the Refocus button to apply the focus adjustment.