Manual

www.acti.com
Firmware User’s Manual V6.09.45
23
How to Use Pan/Tilt
For PTZ / speed dome cameras, click the pan/tilt controls to pan/tilt the camera.
Other pan/tilt features include:
 Auto pan/tilt speed: When “Enabled”, the camera automatically sets the pan/tilt speed
according to the zoom ratio and the selected pan/tilt speed while retaining the clarity and
quality of image even as the camera is panning or tilting. When “Disabled”, the pan/tilt
speed follows the value selected on the Pan/Tilt Speed field.
 Auto-Flip: When “Enabled”, the camera automatically flips the image when the camera
is pan at 180 and then continues panning to the same direction up to 360 . When
“Disabled”, users can only pan the camera to one direction up to 180 .
NOTE: Available only in PTZ I9x camera models.
 Pan/Tilt Speed: Select the desired pan/tilt speed. The bigger the number, the faster the
speed is.
TIP: While the PTZ Control Panel is open, instead of using the pan/tilt controls, move the mouse
cursor over the Live View. Click or drag the mouse to zoom in/out or pan/tilt the camera view.
How to Set the Pan Limit
For PTZ / Speed dome cameras, users can limit the pan movement of the camera from one point
to another.
To set the pan movement limit, do the following:
1. Pan the camera to the starting target area of limitation, then click the to set that
area as the first limit. The position coordinates appear on the Position box.
2. Pan the camera to the ending target area of limitation, then click the corresponding
button to set that area as the other limit. The position coordinates appear on the Position
box.
To disable this limitation, click the Disabled button.
To go to the limitation points directly, click .
Pan/tilt controls