Manual

www.acti.com
Firmware User’s Manual V6.09.45
22
PTZ Control Panel (For PTZ and Zoom Cameras)
For PTZ and zoom camera models, click the PTZ button on the Live View screen to
display the PTZ Control Panel. For PTZ cameras, the PTZ button can be one of the following:
Joystick Mode
This is the basic PTZ button. When the PTZ Control Panel is open, instead of using the pan/tilt
controls, move the mouse cursor over the Live View, the mouse cursor will turn into zoom in/out
or directional icons (e.g. / / / / etc.). Click or drag the mouse to zoom in/out or
pan/tilt the camera view.
Mouse Mode
When the PTZ Control Panel is open, a red cross-hair (+) icon appears. Just like using a PC with
a mouse, users may draw a box using the mouse on the Live View area and the camera will
zoom in on the boxed area. Scroll down the mouse wheel to zoom out and scroll up to zoom in.
To pan the camera, double-click the mouse towards the direction you want to pan.
On the PTZ Control Panel, users can do any the
following:
 Set the home position
 Set the serial hex command protocol and
address
 Pan the camera
 Set the pan limitation
(PTZ and speed dome only)
 Zoom the camera in or out as well as adjust
the zoom speed and step size
 Set the focus to auto refocus or manual
 Set Preset points for touring
 Set Camera Tour
 Set Scan function
(PTZ and Speed Dome only)
NOTE: The PTZ Control Panel may differ depending
on camera model.