Manual
www.acti.com
Firmware User’s Manual V6.09.45
113
Sound Detection: When this +box is checked, the
timeline bar will show orange bars if the sound
detection is triggered on a timeslot.
5
Go to Current Time
Click the button to go the current time.
6
Timeline Bar:
S1 (Video Stream 1)
S2 (Video Stream 2)
Allows users to browse and select the recorded videos by
timeslot. Video recorded from stream 1 is shown on S1
timeline bar, while video from stream 2 is shown on S2. The
bars on the timeline bar indicate each video timeslot.
Blue bar indicates the current selected video timeslot;
the snapshot is shown on the window.
Dark gray bar indicates a recording is present.
Light gray bar indicates no recording.
Red bar indicates motion is detected on that timeslot.
Green bar indicates the digital input is triggered on that
timeslot.
Orange bar indicates the sound detection is triggered
on that timeslot.
7
End Time of Time Bar
The ending time (right side) of the timeline bar.
8
Time Unit
Select the unit of time to use to display the timeline bar. The
default time unit is by “Hour”.
How to Export Video?
1. Select the starting point of the video to export from timeline bar. The bar turns blue.
2. Click the right mouse button and select Mark Export Start.
3. Click the ending point of the video to export. The bar turns blue.
4. Click the right mouse button and select Mark Export End. The scope of the starting to the
ending timeslot is marked blue.
5. Click the right mouse button and select Export Video.
6. Save the video file (.raw).
The exported video can be played back using Archive Player, a free video player tool,
downloadable from the website
(http://www2.acti.com/corpweb/Tools/ProductSelector/SupportToolsUtilities.aspx)
NOTE: The camera memory is allocated to deliver continuous live streaming to all connected
users or devices, such as for NVR recording purposes. The camera will store as many P-frames
as possible on the memory card. However, due to camera memory limitation, the camera may
record only the I-frames on the memory card. To increase the number of P-frames to record on
the memory card, it is recommended to lower the FPS, bit rate and resolution of Stream 1 (see
Compression on pge 63).