Manual

www.acti.com
Firmware User’s Manual V6.09.45
107
Utilities
The “Utilities” are responsible for managing the storage itself rather than the files on the storage.
There are three utilities – Mount, Format and Scan.
Mount
When the Mount storage media button shows “Mount” button then it means that the mass storage
has been inserted to the camera, but the connection between camera and the storage has not
been established yet. By pressing the “Mount” button, the storage becomes active. It is then
possible to check the Status of the disk, write or read data on the disk, remotely access the
storage by Web Configurator or FTP client, etc.
When pressing the “Mount” button, the mounting process will start.