Hardware Manual

www.acti.com

Hardware Manual

Mounting Solutions

There are several mounting options that you can use to install the camera. Select the most

suitable solution for your installation environment.

Mount Types

Accessories

Flush Mount

Use the bundled flush mount to install the camera behind the surface of wall

or ceiling. Only the lens can be seen outside the surface. See Installing the

Camera Using the Flush Mount on page 13.

Tiltable Flush

Mount

Suitable if the camera is required to be tilted to acquire the desired viewing

angle when mounted on high walls or ceiling. The tiltable flush mount is

available for purchase. Installation procedures are covered in the

Installation Guide downloadable from the website

(http://www.acti.com/mountingselector).

Bracket Mount

Suitable for mounting on a hard surface, such as an enclosure or ceiling or

wall made from cement, wood, or metal. Common application will be inside

an ATM machine. The bracket is available for purchase. Installation

procedures are covered in the Installation Guide downloadable from the

website (http://www.acti.com/mountingselector).

Corner Mount

Suitable when mounting the camera on corner walls, like an elevator,

hallway, etc. The camera is tilted 20 to capture a larger viewing angle below

the camera and less on the ceiling. The corner mount is available for

purchase. Installation procedures are covered in the Installation Guide

downloadable from the website (http://www.acti.com/mountingselector).

NOTE:

 For more information about the mounting solutions and accessories, please check the

Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).